AFNI Message Board

History of AFNI updates  

|
April 18, 2018 12:48PM
Or should I be using a different command than 3dclust? Thanks again.

-------------------------------------------------------
> Thank you. So this is the output that I get from
> the table. Does the "mean" represent the effect
> estimate (beta)? And then where can I find the
> t-stat and degrees of freedom?
>
> #Cluster report for file
> /Applications/freesurfer/Paper1/Fixed3_ACS_PCC.nii
> #[Connectivity radius = 1.01 mm Volume threshold
> = 162.00 ]
> #[Single voxel volume = 27.0 (microliters) ]
> #[Voxel datum type = float ]
> #[Voxel dimensions = 3.000 mm X 3.000 mm X
> 3.000 mm ]
> #[Coordinates Order = RAI ]
> #[Fake voxel dimen = 1.000 mm X 1.000 mm X
> 1.000 mm ]
> #Mean and SEM based on Absolute Value of voxel
> intensities:
> #
> #Volume CM RL CM AP CM IS minRL maxRL minAP
> maxAP minIS maxIS Mean SEM Max Int MI
> RL MI AP MI IS
> #------ ----- ----- ----- ----- ----- -----
> ----- ----- ----- ------- ------- -------
> ----- ----- -----
> 474 1.2 56.3 26.3 -13.5 13.5 37.5
> 37.5 76.5 2.5 47.5 0.0064 2.2e-04
> 0.0253 7.5 55.5 23.5
> 365 1.0 -50.8 17.5 -10.5 13.5 -64.5
> 64.5 -34.5 -12.5 47.5 0.0072 2.7e-04
> -0.0229 -7.5 -49.5 8.5
> 38 0.3 24.3 32.8 -4.5 4.5 10.5
> 10.5 34.5 26.5 35.5 0.0049 6.0e-04
> -0.0132 1.5 25.5 32.5
> 22 56.5 9.4 -10.4 49.5 61.5 4.5
> 4.5 13.5 -18.5 -6.5 0.0043 6.8e-04
> -0.0108 61.5 10.5 -9.5
> 17 -51.5 62.7 21.2 -55.5 -46.5 58.5
> 58.5 67.5 14.5 29.5 0.0052 8.5e-04
> 0.0145 -46.5 61.5 17.5
> 16 49.8 58.6 22.6 46.5 52.5 55.5
> 55.5 61.5 11.5 29.5 0.0087 0.0016
> 0.0188 49.5 58.5 26.5
> 13 18.0 -30.8 54.1 13.5 19.5 -34.5
> -34.5 -28.5 47.5 59.5 0.0041 9.4e-04
> 0.0101 19.5 -31.5 53.5
> 11 -20.2 -29.3 53.7 -25.5 -13.5 -34.5
> -34.5 -28.5 50.5 56.5 0.0059 0.0012
> 0.0121 -19.5 -28.5 56.5
> 10 41.4 62.1 20.0 40.5 43.5 58.5
> 58.5 67.5 14.5 23.5 0.0027 6.9e-04
> -0.006 40.5 64.5 23.5
> 9 -61.9 12.8 -10.1 -64.5 -61.5 10.5
> 10.5 16.5 -15.5 -6.5 0.0079 0.0022
> 0.0192 -61.5 10.5 -9.5
> 7 44.9 -33.7 -6.1 43.5 46.5 -37.5
> -37.5 -31.5 -9.5 -3.5 0.0043 9.7e-04
> -0.008 43.5 -34.5 -6.5
> 7 0.6 -34.5 13.6 -1.5 1.5 -37.5
> -37.5 -31.5 8.5 14.5 0.0049 0.0016
> -0.0115 1.5 -34.5 14.5
> 7 47.6 67.2 26.0 46.5 49.5 64.5
> 64.5 67.5 20.5 29.5 0.0061 0.0016
> 0.0122 46.5 67.5 29.5
> 7 16.7 -24.9 56.6 13.5 19.5 -25.5
> -25.5 -22.5 53.5 59.5 0.004 0.0013
> -0.0106 19.5 -25.5 56.5
> 6 -62.0 -0.5 -19.7 -64.5 -61.5 -4.5
> -4.5 1.5 -21.5 -15.5 0.0069 0.0021
> -0.0151 -61.5 1.5 -18.5
> 6 13.0 -57.8 27.8 10.5 13.5 -58.5
> -58.5 -55.5 23.5 32.5 0.0078 0.0022
> -0.0146 13.5 -58.5 26.5
Subject Author Posted

3dLME Output

AFNIbeginner April 16, 2018 09:42AM

Re: 3dLME Output

Gang April 16, 2018 10:01AM

Re: 3dLME Output

AFNIbeginner April 16, 2018 11:55AM

Re: 3dLME Output

Gang April 16, 2018 03:45PM

Re: 3dLME Output

AFNIbeginner April 16, 2018 04:40PM

Re: 3dLME Output

AFNIbeginner April 18, 2018 12:48PM

Re: 3dLME Output

Gang April 18, 2018 02:38PM

Re: 3dLME Output

AFNIbeginner April 18, 2018 02:42PM

Re: 3dLME Output

Gang April 18, 2018 03:08PM

Re: 3dLME Output

AFNIbeginner April 18, 2018 03:19PM

Re: 3dLME Output

Gang April 18, 2018 05:23PM



Sorry, only registered users may post in this forum.

Click here to login