echo auto-generated by afni_proc.py, Fri Oct 9 17:02:42 2026 auto-generated by afni_proc.py, Fri Oct 9 17:02:42 2026 echo (version 8.10, October 6, 2026) (version 8.10, October 6, 2026) echo execution started: `date` date execution started: Fri Oct 9 17:02:46 EDT 2026 afni -ver Precompiled binary linux_rocky_8: Oct 8 2026 (Version AFNI_26.3.01 'Philip the Arab') afni_history -check_date 7 Jan 2026 -- is current: afni_history as new as: 07 Jan 2026 most recent entry is: 06 Oct 2026 if ( 0 ) then if ( 0 > 0 ) then set subj = sub-60068 endif set output_dir = sub-60068.results if ( -d sub-60068.results ) then set runs = ( `count_afni -digits 2 1 1` ) count_afni -digits 2 1 1 mkdir -p sub-60068.results mkdir sub-60068.results/stimuli cp /data/NIMH_SSCC/p001_ap_pamenc/data_15_timing/sub-60068/timing_pamenc/times.CONTROL.txt /data/NIMH_SSCC/p001_ap_pamenc/data_15_timing/sub-60068/timing_pamenc/times.TASK.txt sub-60068.results/stimuli 3dcopy /data/NIMH_SSCC/p001_ap_pamenc/data_13_ssw/sub-60068/anatSS.sub-60068.nii sub-60068.results/anatSS.sub-60068 ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/ptaylor/REF_TEMPLATES/MNI152_2009_template_SSW.nii.gz sub-60068.results/MNI152_2009_template_SSW.nii.gz ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/gaia/UCLA_phenomics/data_clean/sub-60068/anat/sub-60068_T1w.nii.gz sub-60068.results/copy_af_anat_w_skull ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/ptaylor/REF_TEMPLATES/APQC_atlas_MNI_2009c_asym.nii.gz sub-60068.results/ROI_import_MNI_2009c_asym ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/p001_ap_pamenc/data_13_ssw/sub-60068/anatQQ.sub-60068.nii sub-60068.results/anatQQ.sub-60068 ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/p001_ap_pamenc/data_13_ssw/sub-60068/anatQQ.sub-60068.aff12.1D sub-60068.results/anatQQ.sub-60068.aff12.1D ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dcopy /data/NIMH_SSCC/p001_ap_pamenc/data_13_ssw/sub-60068/anatQQ.sub-60068_WARP.nii sub-60068.results/anatQQ.sub-60068_WARP.nii ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dTcat -prefix sub-60068.results/pb00.sub-60068.r01.tcat /data/NIMH_SSCC/gaia/UCLA_phenomics/data_clean/sub-60068/func/sub-60068_task-pamenc_bold.nii.gz[0..$] ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 3.5 s set tr_counts = ( 242 ) cd sub-60068.results gtkyd_check.py -infiles pb00.sub-60068.r01.tcat+orig.HEAD -outdir gtkyd ++ Have 1 dsets to check ++ Making new output directory: gtkyd ++ Now starting to Get To Know Your Data... ++ --------------------------- ++ DONE. See the outputs: group summary table : gtkyd.xls group detailed values : gtkyd/rep_gtkyd_detail_*.dat group unique values : gtkyd/rep_gtkyd_unique_*.dat individual value lists : gtkyd/dset_*.txt tee out.gtkyd.outliers.txt gen_ss_review_table.py -infiles gtkyd/dset_gtkyd_pb00.sub-60068.r01.tcat.txt -outlier_sep space -report_outliers datum VARY -report_outliers orient VARY -report_outliers av_space VARY -- no outlier subjects to list @radial_correlate -nfirst 0 -polort 4 -do_clean yes -rdir radcor.pb00.tcat pb00.sub-60068.r01.tcat+orig.HEAD ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 3.1 s ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./epi.r01+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./epi.r01+orig.BRIK is 33.815468 degrees from plumb. *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./radcor.20.r01.automask+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./radcor.20.r01.automask+orig.BRIK is 33.815468 degrees from plumb. -- radcor: detrend -polort 4, new eset = det.r01 input : epi.r01+orig ++ 3dTproject: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Cox the Algebraic (Linear) *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./epi.r01+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./epi.r01+orig.BRIK is 33.815468 degrees from plumb. ++ Setting up regressors ++ 1 Blocks * 5 polynomials -- 5 polort regressors ++ 242 retained time points MINUS 5 regressors ==> 237 D.O.F. left ++ no -mask option ==> processing all 139264 voxels in dataset ++ 3dTproject input data :: 2176 vectors are constant -- radcor: running correlation on dataset pb00.sub-60068.r01.tcat+orig.HEAD ... ++ radcor: merge blur: rad 20, FWHM 40 ++ 3dmerge: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./det.r01+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./det.r01+orig.BRIK is 33.815468 degrees from plumb. ++ default -1dindex = 0 ++ default -1tindex = 1 ++ Oblique dataset:./det.r01+orig.BRIK is 33.815468 degrees from plumb. Program 3dmerge 3dmerge: edit and combine 3D datasets, by RW Cox ++ editing input dataset in memory (128.6 MB) ++ edt_blur: sigx 16.9864, dx 3, fwhm 40, sfac 2.5, firx 15 .................................................................................................................................................................................................................................................. -- Wrote edited dataset: ./sphere.mean.20.r01+orig.BRIK ++ 3dTcorrelate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./sphere.mean.20.r01+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./sphere.mean.20.r01+orig.BRIK is 33.815468 degrees from plumb. ++ Oblique dataset:./det.r01+orig.BRIK is 33.815468 degrees from plumb. ++ Wrote dataset: ./radcor.20.r01.corr+orig.BRIK ++ 3dbucket: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ---- radcor: done ++ have do_clean, cleaning up... find_variance_lines.tcsh -polort 4 -rdir vlines.pb00.tcat pb00.sub-60068.r01.tcat+orig.HEAD tee out.vlines.pb00.tcat.txt ++ have nslices : 34 ++ params: min_cvox 7, nerode 0, perc 90, polort 4, ignore_edges 1, sdpower 2, thresh 0.90, num_pc 0, do_pc_3dD 1, do_pc_vstat 1 ++ copying pb00.sub-60068.r01.tcat+orig.HEAD[0..$] to ts.0.orig.r01.nii.gz ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 6.7 s ++ creating automask from first dset ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.0.orig.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.0.orig.r01.nii.gz is 33.815468 degrees from plumb. ++ Loading dataset ts.0.orig.r01.nii.gz ++ Forming automask + Fixed clip level = 383.125427 + Used gradual clip level = 344.136566 .. 447.693817 + Number voxels above clip level = 34901 + Clustering voxels ... + Largest cluster has 34453 voxels + Clustering voxels ... + Largest cluster has 34114 voxels + Filled 474 voxels in small holes; now have 34588 voxels + Filled 5 voxels in large holes; now have 34593 voxels + Clustering voxels ... + Largest cluster has 34592 voxels + Clustering non-brain voxels ... + Clustering voxels ... + Largest cluster has 104672 voxels + Mask now has 34592 voxels ++ 34592 voxels in the mask [out of 139264: 24.84%] ++ first 11 x-planes are zero [from R] ++ last 10 x-planes are zero [from L] ++ first 2 y-planes are zero [from P] ++ last 5 y-planes are zero [from A] ++ first 0 z-planes are zero [from I] ++ last 2 z-planes are zero [from S] ++ Output dataset ./mask.nii.gz ++ CPU time = 0.000000 sec -- will apply mask mask.nii.gz ++ requiring 7 voxels in mask columns ++ 3dLocalstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz is 33.815468 degrees from plumb. ++ Number of voxels in mask = 34592 ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz is 33.815468 degrees from plumb. ++ Neighborhood comprises 69 voxels ++ Start sub-brick [0] ++ Output dataset ./tmp.mask.col.count.nii.gz ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./mask.nii.gz ++ 3dLocalstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz is 33.815468 degrees from plumb. ++ Neighborhood comprises 69 voxels ++ Start sub-brick [0] ++ Output dataset ./tmp.edge.nii.gz ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./tmp.e2.nii.gz ++ processing 1 input dataset(s), NN=2... ++ padding all datasets by 1 (for dilations) *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/tmp.e2.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/tmp.e2.nii.gz is 33.815468 degrees from plumb. ++ have 1 volume of input, no combining ++ frac 0 over 1 volumes gives min count 0 ++ voxel limits: 0 clipped, 85238 survived, 54026 were zero ++ writing result tmp.edge.nii.gz... ++ Output dataset ./tmp.edge.nii.gz ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./mask_edge.nii.gz -- detrend -polort 4, new eset = ts.1.det.r01.nii.gz ++ 3dTproject: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Cox the Algebraic (Linear) *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.0.orig.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.0.orig.r01.nii.gz is 33.815468 degrees from plumb. ++ Setting up regressors ++ 1 Blocks * 5 polynomials -- 5 polort regressors ++ 242 retained time points MINUS 5 regressors ==> 237 D.O.F. left ++ no -mask option ==> processing all 139264 voxels in dataset ++ 3dTproject input data :: 2176 vectors are constant ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.1.det.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/ts.1.det.r01.nii.gz is 33.815468 degrees from plumb. ++ Output dataset ./tmp.stdev.nii.gz ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./var.0.orig.r01.nii.gz *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz is 33.815468 degrees from plumb. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/var.0.orig.r01.nii.gz is 33.815468 degrees from plumb. ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./var.1.scale.r01.nii.gz ++ 3dLocalstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/mask.nii.gz is 33.815468 degrees from plumb. ++ Number of voxels in mask = 34060 ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/var.1.scale.r01.nii.gz is 33.815468 degrees from plumb. ++ Neighborhood comprises 69 voxels ++ Start sub-brick [0] ++ Output dataset ./proj.r01.nii.gz 3dClusterize -ithr 0 -idat 0 -NN 2 -2sided -1 0.90 -inset proj.r01.nii.gz -pref_map clustset.r01.nii.gz -outvol_if_no_clust ++ Neighborhood definition (NN=2) accepted ++ User input stat threshold: -1 ++ User input stat threshold: 0.90 *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/proj.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/proj.r01.nii.gz is 33.815468 degrees from plumb. ++ Data volume: [0] 'MEAN' ++ Threshold volume: [0] 'MEAN' ++ How many sides to this stat? 0 ++ Looks like clustering is *not* being performed on a stat value; won't worry about sidedness, then. ++ Opt code: 2sided,-1,0.90,NN2 ++ No mask being used? That *could* be OK, but thought I'd let you know... ++ Threshold volume [0] does *not* appear to be a stat! ++ Sorting clusters by size. ++ Writing out map of cluster ROIs. ++ Output dataset ./clustset.r01.nii.gz # # Cluster report #[ Dataset prefix = proj.r01.nii.gz ] #[ Threshold vol = [0] 'MEAN' ] #[ Supplement dat vol = [0] 'MEAN' ] #[ Option summary = 2sided,-1,0.90,NN2 ] #[ Threshold value(s) = left-tail thr=-1.000000; right-tail thr=0.900000 ] #[ Aux. stat. info. = not a stat! ] #[ Nvoxel threshold = 0; Volume threshold = 0.000 ] #[ Single voxel volume = 36.000 (microliters) ] #[ Neighbor type, NN = 2 ] #[ Voxel datum type = float ] #[ Voxel dimensions = 3.000 mm X 3.000 mm X 4.000 mm ] #[ Coordinates Order = RAI ] #[ Mean and SEM based on signed voxel intensities ] # #Volume CM RL CM AP CM IS minRL maxRL minAP maxAP minIS maxIS Mean SEM Max Int MI RL MI AP MI IS #------ ----- ----- ----- ----- ----- ----- ----- ----- ----- ------- ------- ------- ----- ----- ----- 7 6.7 -124.1 -39.8 6.7 6.7 -124.1 -124.1 -51.8 -27.8 1 0 1 6.7 -124.1 -51.8 4 15.7 34.9 -17.8 15.7 15.7 34.9 34.9 -23.8 -11.8 0.9276 8.7e-05 0.9276 15.7 34.9 -15.8 3 15.7 34.9 -47.8 15.7 15.7 34.9 34.9 -51.8 -43.8 0.9276 1.0e-04 0.9276 15.7 34.9 -51.8 #------ ----- ----- ----- ----- ----- ----- ----- ----- ----- ------- ------- ------- ----- ----- ----- # 14 11.0 -47.6 -35.4 0.9638 0.01 6.70 -124.10 -21.78 15.70 34.90 -21.78 15.70 34.90 -21.78 -- check for edge clusters to remove (OK to make brick of 0s)... ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./clustset.edge.r01.nii.gz *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clustset.edge.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clustset.edge.r01.nii.gz is 33.815468 degrees from plumb. ++ have 3 clusters but 3 are at edges -- creating inner clusterset clustset.inner.r01.nii.gz (but empty) ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./clustset.inner.r01.nii.gz -- keeping clusters : removing clusters: 1 2 3 ++ updated inner coord list: -- evaluating intersection (across clustset.inner.r*.nii.gz) ... ++ processing 1 input dataset(s), NN=2... ++ padding all datasets by 0 (for dilations) *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clustset.inner.r01.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clustset.inner.r01.nii.gz is 33.815468 degrees from plumb. ++ have 1 volume of input, no combining ++ frac 1 over 1 volumes gives min count 1 ++ voxel limits: 0 clipped, 0 survived, 139264 were zero ++ writing result clust.inter.nii.gz... ++ Output dataset ./clust.inter.nii.gz ++ Neighborhood definition (NN=2) accepted *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clust.inter.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/vlines.pb00.tcat/clust.inter.nii.gz is 33.815468 degrees from plumb. ++ User input stat threshold: 0 ++ User input stat threshold: 0.9 ++ Data volume: [0] '2sided,-1,0.90,NN2' ++ Threshold volume: [0] '2sided,-1,0.90,NN2' ++ How many sides to this stat? 0 ++ Looks like clustering is *not* being performed on a stat value; won't worry about sidedness, then. ++ Opt code: 2sided,0,0.9,NN2 ++ No mask being used? That *could* be OK, but thought I'd let you know... ++ Threshold volume [0] does *not* appear to be a stat! *+ WARNING: No clusters found! ++ Writing out map of cluster ROIs. ++ Output dataset ./clust.inter.enum.nii.gz #** NO CLUSTERS FOUND *** ++ Check about making images ++ have do_clean, removing time series... == found questionable regions across inputs: 0 found questionable intersected regions : 0 =============== bad_coords.full.r01.txt =============== 6.70 -124.10 -21.78 15.70 34.90 -21.78 15.70 34.90 -21.78 =============== bad_coords.inter.txt =============== =============== bad_coords.r01.txt =============== touch out.pre_ss_warn.txt foreach run ( 01 ) 3dToutcount -automask -fraction -polort 4 -legendre pb00.sub-60068.r01.tcat+orig ++ 3dToutcount: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./pb00.sub-60068.r01.tcat+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./pb00.sub-60068.r01.tcat+orig.BRIK is 33.815468 degrees from plumb. ++ 34592 voxels passed mask/clip 1deval -a outcount.r01.1D -expr 1-step(a-0.05) if ( `1deval -a outcount.r$run.1D"{0}" -expr "step(a-0.4)"` ) then 1deval -a outcount.r01.1D{0} -expr step(a-0.4) end cat outcount.r01.1D cat rm.out.cen.r01.1D foreach run ( 01 ) 3dTto1D -method 4095_warn -input pb00.sub-60068.r01.tcat+orig tee -a out.4095_all.txt *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./pb00.sub-60068.r01.tcat+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./pb00.sub-60068.r01.tcat+orig.BRIK is 33.815468 degrees from plumb. ++ computing 4095_warn, nvox = 139264, nmask = 139264, nt = 242 ++ global max = 1857.000000, global 4095 count = 0 ++ max of 1857 is okay, clearing results... end awk /warning/ {print} out.4095_all.txt tee out.4095_warn.txt set minindex = `3dTstat -argmin -prefix - outcount_rall.1D\'` 3dTstat -argmin -prefix - outcount_rall.1D' ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox set ovals = ( `1d_tool.py -set_run_lengths $tr_counts -index_to_run_tr $minindex` ) 1d_tool.py -set_run_lengths 242 -index_to_run_tr 171 set minoutrun = 01 set minouttr = 171 echo min outlier: run 01, TR 171 tee out.min_outlier.txt min outlier: run 01, TR 171 foreach run ( 01 ) 3dTshift -tzero 0 -quintic -prefix pb01.sub-60068.r01.tshift -tpattern alt+z2 pb00.sub-60068.r01.tcat+orig ++ 3dTshift: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./pb00.sub-60068.r01.tcat+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./pb00.sub-60068.r01.tcat+orig.BRIK is 33.815468 degrees from plumb. ++ updating time offset to 0 end 3dbucket -prefix vr_base_min_outlier pb01.sub-60068.r01.tshift+orig[171] ++ 3dbucket: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dLocalUnifize -input vr_base_min_outlier+orig -prefix vr_base_min_outlier_unif ++ Start 3dLocalUnifize work ++ Making working directory: ./__wdir_LocalUni_CWXW0yxRlQG ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 0.1 s ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/__wdir_LocalUni_CWXW0yxRlQG/dset_00_cp.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/__wdir_LocalUni_CWXW0yxRlQG/dset_00_cp.nii.gz is 33.815468 degrees from plumb. ++ Loading dataset dset_00_cp.nii.gz ++ Forming automask + Fixed clip level = 383.562500 + Used gradual clip level = 345.050415 .. 449.119995 + Number voxels above clip level = 34927 + Clustering voxels ... + Largest cluster has 34460 voxels + Clustering voxels ... + Largest cluster has 34081 voxels + Filled 500 voxels in small holes; now have 34581 voxels + Filled 5 voxels in large holes; now have 34586 voxels + Clustering voxels ... + Largest cluster has 34584 voxels + Clustering non-brain voxels ... + Clustering voxels ... + Largest cluster has 104680 voxels + Mask now has 34584 voxels ++ 34584 voxels in the mask [out of 139264: 24.83%] ++ first 11 x-planes are zero [from R] ++ last 10 x-planes are zero [from L] ++ first 2 y-planes are zero [from P] ++ last 5 y-planes are zero [from A] ++ first 0 z-planes are zero [from I] ++ last 2 z-planes are zero [from S] ++ Output dataset ./dset_00_mask.nii.gz ++ CPU time = 0.000000 sec ++ 3dLocalstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as /lscratch/32397969/sub-60068/sub-60068.results/__wdir_LocalUni_CWXW0yxRlQG/dset_00_mask.nii.gz, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/__wdir_LocalUni_CWXW0yxRlQG/dset_00_mask.nii.gz is 33.815468 degrees from plumb. ++ Number of voxels in mask = 34584 ++ Oblique dataset:/lscratch/32397969/sub-60068/sub-60068.results/__wdir_LocalUni_CWXW0yxRlQG/dset_00_cp.nii.gz is 33.815468 degrees from plumb. ++ Neighborhood comprises 123 voxels ++ Start sub-brick [0] ++ Output dataset ./dset_01_lu.nii.gz ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./dset_02_rat.nii.gz ++ Apply filter threshold to scaled image: 1.5 ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands ++ Output dataset ./dset_04_filt.nii.gz ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] +* Removing the working dir: '__wdir_LocalUni_CWXW0yxRlQG' ++ DONE! View the finished, locally-unifized product: /lscratch/32397969/sub-60068/sub-60068.results/vr_base_min_outlier_unif align_epi_anat.py -anat2epi -anat anatSS.sub-60068+orig -suffix _al_junk -epi vr_base_min_outlier_unif+orig -epi_base 0 -epi_strip 3dAutomask -anat_has_skull no -giant_move -cost lpc+ZZ -check_flip -volreg off -tshift off #++ align_epi_anat version: 1.65 #++ turning off volume registration #Script is running (command trimmed): 3dAttribute DELTA ./vr_base_min_outlier_unif+orig #Script is running (command trimmed): 3dAttribute DELTA ./vr_base_min_outlier_unif+orig #Script is running (command trimmed): 3dAttribute DELTA ./anatSS.sub-60068+orig #++ Multi-cost is lpc+ZZ #++ Removing all the temporary files #Script is running: \rm -f ./__tt_vr_base_min_outlier_unif* #Script is running: \rm -f ./__tt_anatSS.sub-60068* #Script is running (command trimmed): 3dcopy ./anatSS.sub-60068+orig ./anatSS.sub-60068_unflipped+orig ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] #Script is running (command trimmed): 3dinfo ./anatSS.sub-60068_unflipped+orig | \grep 'Data Axes Tilt:'| \grep 'Oblique' #++ Dataset /lscratch/32397969/sub-60068/sub-60068.results/anatSS.sub-60068_unflipped+orig is not oblique #Script is running (command trimmed): 3dinfo ./vr_base_min_outlier_unif+orig | \grep 'Data Axes Tilt:'| \grep 'Oblique' #++ Dataset /lscratch/32397969/sub-60068/sub-60068.results/vr_base_min_outlier_unif+orig is ***oblique**** #Script is running (command trimmed): 3dAttribute DELTA ./anatSS.sub-60068_unflipped+orig #++ Spacing for anat to oblique epi alignment is 1.000000 #++ Matching obliquity of anat to epi #Script is running (command trimmed): 3dWarp -verb -card2oblique ./vr_base_min_outlier_unif+orig -prefix ./anatSS.sub-60068_unflipped_ob -newgrid 1.000000 ./anatSS.sub-60068_unflipped+orig | \grep -A 4 '# mat44 Obliquity Transformation ::' > ./anatSS.sub-60068_unflipped_obla2e_mat.1D ++ 3dWarp: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox #++ using 0th sub-brick because only one found #Script is running (command trimmed): 3dbucket -prefix ./__tt_vr_base_min_outlier_unif_ts ./vr_base_min_outlier_unif+orig'[0]' ++ 3dbucket: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] #++ removing skull or area outside brain #Script is running (command trimmed): 3dAutomask -apply_prefix ./vr_base_min_outlier_unif_ts_ns ./__tt_vr_base_min_outlier_unif_ts+orig ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./__tt_vr_base_min_outlier_unif_ts+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./__tt_vr_base_min_outlier_unif_ts+orig.BRIK is 33.815468 degrees from plumb. ++ Loading dataset ./__tt_vr_base_min_outlier_unif_ts+orig ++ Forming automask + Fixed clip level = 0.500100 + Used gradual clip level = 0.498300 .. 0.501750 + Number voxels above clip level = 33981 + Clustering voxels ... + Largest cluster has 33981 voxels + Clustering voxels ... + Largest cluster has 33940 voxels + Filled 361 voxels in small holes; now have 34301 voxels + Clustering voxels ... + Largest cluster has 34300 voxels + Clustering non-brain voxels ... + Clustering voxels ... + Largest cluster has 104964 voxels + Mask now has 34300 voxels ++ 34300 voxels in the mask [out of 139264: 24.63%] ++ first 11 x-planes are zero [from R] ++ last 10 x-planes are zero [from L] ++ first 2 y-planes are zero [from P] ++ last 5 y-planes are zero [from A] ++ first 0 z-planes are zero [from I] ++ last 2 z-planes are zero [from S] ++ applying mask to original data ++ Writing masked data ++ CPU time = 0.000000 sec #++ Computing weight mask #Script is running (command trimmed): 3dBrickStat -automask -percentile 90.000000 1 90.000000 ./vr_base_min_outlier_unif_ts_ns+orig #++ Applying threshold of 1.146309 on /lscratch/32397969/sub-60068/sub-60068.results/vr_base_min_outlier_unif_ts_ns+orig #Script is running (command trimmed): 3dcalc -datum float -prefix ./vr_base_min_outlier_unif_ts_ns_wt -a ./vr_base_min_outlier_unif_ts_ns+orig -expr 'min(1,(a/1.146309))' ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands #++ Aligning anat data to epi data #Script is running (command trimmed): 3dAllineate -lpc+ZZ -wtprefix ./anatSS.sub-60068_unflipped_ob_al_junk_wtal -weight ./vr_base_min_outlier_unif_ts_ns_wt+orig -source ./anatSS.sub-60068_unflipped_ob+orig -prefix ./anatSS.sub-60068_unflipped_ob_temp_al_junk -base ./vr_base_min_outlier_unif_ts_ns+orig -cmass -1Dmatrix_save ./anatSS.sub-60068_al_junk_e2a_only_mat.aff12.1D -master BASE -mast_dxyz 1.000000 -weight_frac 1.0 -maxrot 6 -maxshf 10 -warp aff -source_automask+4 -twobest 11 -twopass -maxrot 45 -maxshf 40 -fineblur 1 -source_automask+2 ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator ++ lpc+ parameters: hel=0.40 mi=0.20 nmi=0.20 crA=0.40 ov=0.40 [to be zeroed at Final iteration] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK is 33.815468 degrees from plumb. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns+orig.BRIK is 33.815468 degrees from plumb. ++ Option '-cmass' enables center-of-mass code = 7 = +xyz ++ Source dataset: ./anatSS.sub-60068_unflipped_ob+orig.HEAD ++ Base dataset: ./vr_base_min_outlier_unif_ts_ns+orig.HEAD ++ Loading datasets into memory ++ NOTE: base and source coordinate systems have different handedness + Orientations: base=Left handed (RPI); source=Right handed (RAI) + - It is nothing to worry about: 3dAllineate aligns based on coordinates. + - But it is always important to check the alignment visually to be sure. ++ Local correlation: blok type = 'TOHD(17.0941)' ++ lpc+ parameters: hel=0.40 mi=0.20 nmi=0.20 crA=0.40 ov=0.40 [to be zeroed at Final iteration] ++ changing output grid spacing to 1.0000 mm ++ OpenMP thread count = 8 ++ ======= Allineation of 1 sub-bricks using Local Pearson Signed + Others ======= ++ *** Coarse pass begins *** ++ *** Fine pass begins *** + Final fine fit Parameters: x-shift= -6.2183 y-shift= 1.7725 z-shift= -1.6572 ... enorm= 6.6749 mm z-angle= 2.0087 x-angle= -0.2463 y-angle= 2.5075 ... total= 3.2188 deg x-scale= 0.9948 y-scale= 1.0107 z-scale= 0.9867 ... vol3D= 0.9921=(0.9974)^3 [base about same as source] y/x-shear= 0.0001 z/x-shear= -0.0021 z/y-shear= 0.0194 ++ Wrote -1Dmatrix_save ./anatSS.sub-60068_al_junk_e2a_only_mat.aff12.1D ++ 3dAllineate: total CPU time = 0.0 sec Elapsed = 71.5 ++ ########################################################### ++ # PLEASE check results VISUALLY for alignment quality # ++ ########################################################### #Script is running (command trimmed): 3dLRflip -prefix ./__tt_anatSS.sub-60068_lr_al_junk -overwrite ./anatSS.sub-60068_unflipped_ob+orig ++ processing ./anatSS.sub-60068_unflipped_ob+orig ... #Script is running (command trimmed): 3dAllineate -lpc+ZZ -weight ./vr_base_min_outlier_unif_ts_ns_wt+orig -source ./__tt_anatSS.sub-60068_lr_al_junk+orig -prefix ./anatSS.sub-60068_flip_al_junk -base ./vr_base_min_outlier_unif_ts_ns+orig -cmass -1Dmatrix_save ./anatSS.sub-60068_flip__al_junk_mat.aff12.1D -master BASE -mast_dxyz 1.000000 -weight_frac 1.0 -maxrot 6 -maxshf 10 -warp aff -source_automask+4 -twobest 11 -twopass -maxrot 45 -maxshf 40 -fineblur 1 -source_automask+2 ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator ++ lpc+ parameters: hel=0.40 mi=0.20 nmi=0.20 crA=0.40 ov=0.40 [to be zeroed at Final iteration] *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK is 33.815468 degrees from plumb. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns+orig.BRIK is 33.815468 degrees from plumb. ++ Option '-cmass' enables center-of-mass code = 7 = +xyz ++ Source dataset: ./__tt_anatSS.sub-60068_lr_al_junk+orig.HEAD ++ Base dataset: ./vr_base_min_outlier_unif_ts_ns+orig.HEAD ++ Loading datasets into memory ++ NOTE: base and source coordinate systems have different handedness + Orientations: base=Left handed (RPI); source=Right handed (RAI) + - It is nothing to worry about: 3dAllineate aligns based on coordinates. + - But it is always important to check the alignment visually to be sure. ++ Local correlation: blok type = 'TOHD(17.0941)' ++ lpc+ parameters: hel=0.40 mi=0.20 nmi=0.20 crA=0.40 ov=0.40 [to be zeroed at Final iteration] ++ changing output grid spacing to 1.0000 mm ++ OpenMP thread count = 8 ++ ======= Allineation of 1 sub-bricks using Local Pearson Signed + Others ======= ++ *** Coarse pass begins *** ++ *** Fine pass begins *** + Final fine fit Parameters: x-shift= 0.4587 y-shift= 2.4076 z-shift= -0.7761 ... enorm= 2.5708 mm z-angle= 2.7961 x-angle= -0.8340 y-angle= -6.4492 ... total= 7.0964 deg x-scale= 0.9793 y-scale= 1.0244 z-scale= 0.9782 ... vol3D= 0.9813=(0.9937)^3 [base about same as source] y/x-shear= 0.0179 z/x-shear= 0.0929 z/y-shear= 0.0244 ++ Wrote -1Dmatrix_save ./anatSS.sub-60068_flip__al_junk_mat.aff12.1D ++ 3dAllineate: total CPU time = 0.0 sec Elapsed = 73.9 ++ ########################################################### ++ # PLEASE check results VISUALLY for alignment quality # ++ ########################################################### #Script is running (command trimmed): 3dAllineate -allcostX1D IDENTITY __tt_lr_noflipcosts.1D -weight ./vr_base_min_outlier_unif_ts_ns_wt+orig -source ./anatSS.sub-60068_unflipped_ob_temp_al_junk+orig -base ./vr_base_min_outlier_unif_ts_ns+orig -cmass -master BASE -mast_dxyz 1.000000 -weight_frac 1.0 -maxrot 6 -maxshf 10 -warp aff -source_automask+4 -twobest 11 -twopass -maxrot 45 -maxshf 40 -fineblur 1 -source_automask+2 ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK is 33.815468 degrees from plumb. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns+orig.BRIK is 33.815468 degrees from plumb. ++ Option '-cmass' enables center-of-mass code = 7 = +xyz ++ Source dataset: ./anatSS.sub-60068_unflipped_ob_temp_al_junk+orig.HEAD ++ Base dataset: ./vr_base_min_outlier_unif_ts_ns+orig.HEAD ++ Loading datasets into memory ++ Local correlation: blok type = 'TOHD(17.0941)' ++ OpenMP thread count = 8 ++ Writing -allcostX1D results to '__tt_lr_noflipcosts.1D' ++ -allcostX1D finished #Script is running (command trimmed): 3dAllineate -allcostX1D IDENTITY __tt_lr_flipcosts.1D -weight ./vr_base_min_outlier_unif_ts_ns_wt+orig -source ./anatSS.sub-60068_flip_al_junk+orig -base ./vr_base_min_outlier_unif_ts_ns+orig -cmass -master BASE -mast_dxyz 1.000000 -weight_frac 1.0 -maxrot 6 -maxshf 10 -warp aff -source_automask+4 -twobest 11 -twopass -maxrot 45 -maxshf 40 -fineblur 1 -source_automask+2 ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns_wt+orig.BRIK is 33.815468 degrees from plumb. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns+orig.BRIK is 33.815468 degrees from plumb. ++ Option '-cmass' enables center-of-mass code = 7 = +xyz ++ Source dataset: ./anatSS.sub-60068_flip_al_junk+orig.HEAD ++ Base dataset: ./vr_base_min_outlier_unif_ts_ns+orig.HEAD ++ Loading datasets into memory ++ Local correlation: blok type = 'TOHD(17.0941)' ++ OpenMP thread count = 8 ++ Writing -allcostX1D results to '__tt_lr_flipcosts.1D' ++ -allcostX1D finished No flip cost is -0.177070 for lpc+ZZ cost function Flip cost is -0.048933 for lpc+ZZ cost function Data does not need flipping #Script is running (command trimmed): cat_matvec -ONELINE ./anatSS.sub-60068_al_junk_e2a_only_mat.aff12.1D ./anatSS.sub-60068_unflipped_obla2e_mat.1D -I > ./anatSS.sub-60068_al_junk_mat.aff12.1D #++ Combining anat to epi and oblique transformations #Script is running (command trimmed): 3dAllineate -base ./vr_base_min_outlier_unif_ts_ns+orig -1Dmatrix_apply ./anatSS.sub-60068_al_junk_mat.aff12.1D -prefix ./anatSS.sub-60068_al_junk -input ./anatSS.sub-60068_unflipped+orig -master BASE -mast_dxyz 1.000000 -weight_frac 1.0 -maxrot 6 -maxshf 10 -warp aff -source_automask+4 -twobest 11 -twopass -maxrot 45 -maxshf 40 -fineblur 1 -source_automask+2 ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier_unif_ts_ns+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier_unif_ts_ns+orig.BRIK is 33.815468 degrees from plumb. ++ Source dataset: ./anatSS.sub-60068_unflipped+orig.HEAD ++ Base dataset: ./vr_base_min_outlier_unif_ts_ns+orig.HEAD ++ Loading datasets into memory ++ NOTE: base and source coordinate systems have different handedness + Orientations: base=Left handed (RPI); source=Right handed (LPI) + - It is nothing to worry about: 3dAllineate aligns based on coordinates. + - But it is always important to check the alignment visually to be sure. + -cmass x y z shifts = -4.963 48.605 26.146 + shift search range is +/- = 60.669 60.669 42.372 + 8.2% 80.1% 61.7% ++ changing output grid spacing to 1.0000 mm ++ OpenMP thread count = 8 ++ ========== Applying transformation to 1 sub-bricks ========== ++ 3dAllineate: total CPU time = 0.0 sec Elapsed = 1.1 ++ ########################################################### #++ Creating final output: anat data aligned to epi # copy is not necessary #++ Saving history #Script is running (command trimmed): 3dNotes -h "align_epi_anat.py -anat2epi -anat anatSS.sub-60068+orig -suffix \ _al_junk -epi vr_base_min_outlier_unif+orig -epi_base 0 -epi_strip \ 3dAutomask -anat_has_skull no -giant_move -cost lpc+ZZ -check_flip \ -volreg off -tshift off" \ ./anatSS.sub-60068_al_junk+orig #++ Removing all the temporary files #Script is running: \rm -f ./__tt_vr_base_min_outlier_unif* #Script is running: \rm -f ./__tt_anatSS.sub-60068* # Finished alignment successfully if ( ! -f anatQQ.sub-60068+tlrc.HEAD ) then foreach run ( 01 ) 3dvolreg -verbose -zpad 1 -base vr_base_min_outlier+orig -1Dfile dfile.r01.1D -prefix rm.epi.volreg.r01 -cubic -1Dmatrix_save mat.r01.vr.aff12.1D pb01.sub-60068.r01.tshift+orig ++ 3dvolreg: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier+orig.BRIK is 33.815468 degrees from plumb. ++ Reading in base dataset ./vr_base_min_outlier+orig.BRIK ++ Oblique dataset:./pb01.sub-60068.r01.tshift+orig.BRIK is 33.815468 degrees from plumb. ++ Reading input dataset ./pb01.sub-60068.r01.tshift+orig.BRIK ++ Edging: x=3 y=3 z=2 ++ Creating mask for -maxdisp + Automask has 37025 voxels + 5745 voxels left in -maxdisp mask after erosion ++ Initializing alignment base ++ edt_blur: sigx 9, dx 3, fwhm 21.1934, sfac 2.5, firx 8 ++ Starting final pass on 242 sub-bricks: 0..1..2..3..4..5..6..7..8..9..10..11..12..13..14..15..16..17..18..19..20..21..22..23..24..25..26..27..28..29..30..31..32..33..34..35..36..37..38..39..40..41..42..43..44..45..46..47..48..49..50..51..52..53..54..55..56..57..58..59..60..61..62..63..64..65..66..67..68..69..70..71..72..73..74..75..76..77..78..79..80..81..82..83..84..85..86..87..88..89..90..91..92..93..94..95..96..97..98..99..100..101..102..103..104..105..106..107..108..109..110..111..112..113..114..115..116..117..118..119..120..121..122..123..124..125..126..127..128..129..130..131..132..133..134..135..136..137..138..139..140..141..142..143..144..145..146..147..148..149..150..151..152..153..154..155..156..157..158..159..160..161..162..163..164..165..166..167..168..169..170..171..172..173..174..175..176..177..178..179..180..181..182..183..184..185..186..187..188..189..190..191..192..193..194..195..196..197..198..199..200..201..202..203..204..205..206..207..208..209..210..211..212..213..214..215..216..217..218..219..220..221..222..223..224..225..226..227..228..229..230..231..232..233..234..235..236..237..238..239..240..241.. ++ CPU time for realignment=0 s [=0 s/sub-brick] ++ Min : roll=-0.063 pitch=-1.402 yaw=-0.339 dS=-0.249 dL=-0.303 dP=-0.056 ++ Mean: roll=+0.118 pitch=-0.366 yaw=-0.006 dS=+0.066 dL=+0.013 dP=+0.169 ++ Max : roll=+0.407 pitch=+0.372 yaw=+0.205 dS=+0.430 dL=+0.161 dP=+0.708 ++ Max displacements (mm) for each sub-brick: 1.90(0.00) 2.40(0.69) 2.73(0.50) 2.33(0.43) 2.36(0.11) 2.09(0.30) 1.35(0.78) 1.55(0.21) 1.66(0.15) 1.98(0.43) 2.12(0.19) 2.05(0.13) 2.17(0.14) 1.91(0.47) 2.05(0.48) 2.59(0.57) 2.52(0.12) 2.51(0.08) 2.46(0.11) 2.49(0.06) 2.45(0.05) 2.33(0.12) 2.51(0.25) 2.83(0.43) 2.92(0.23) 2.80(0.14) 2.83(0.08) 2.75(0.08) 2.67(0.10) 2.60(0.07) 2.72(0.13) 2.74(0.06) 2.69(0.07) 2.68(0.05) 2.64(0.06) 2.58(0.06) 2.52(0.06) 2.60(0.10) 2.68(0.10) 2.57(0.11) 2.51(0.08) 2.47(0.08) 2.33(0.15) 2.17(0.17) 2.18(0.07) 2.24(0.06) 2.17(0.08) 2.05(0.12) 2.21(0.23) 2.36(0.16) 2.07(0.33) 2.18(0.15) 2.28(0.13) 2.20(0.09) 2.10(0.10) 2.08(0.03) 2.05(0.04) 2.06(0.02) 2.16(0.10) 2.16(0.04) 2.21(0.07) 1.99(0.30) 2.16(0.22) 2.34(0.18) 2.26(0.16) 2.17(0.10) 2.13(0.06) 2.17(0.07) 2.05(0.13) 1.94(0.12) 2.06(0.15) 2.05(0.05) 1.87(0.19) 1.83(0.05) 1.75(0.12) 1.60(0.15) 1.56(0.04) 1.51(0.08) 1.41(0.11) 1.33(0.08) 1.41(0.11) 1.24(0.19) 1.04(0.20) 1.02(0.05) 1.03(0.04) 0.90(0.14) 1.01(0.13) 0.92(0.09) 0.83(0.11) 0.82(0.08) 0.42(0.46) 0.56(0.21) 0.53(0.03) 0.52(0.04) 0.53(0.04) 0.50(0.05) 0.53(0.04) 0.54(0.03) 0.56(0.04) 0.66(0.15) 0.67(0.18) 1.20(0.64) 1.02(0.19) 1.04(0.06) 1.13(0.10) 1.07(0.07) 0.97(0.10) 1.05(0.09) 0.99(0.06) 1.00(0.04) 1.06(0.08) 0.96(0.10) 1.08(0.13) 1.13(0.06) 1.04(0.10) 0.95(0.10) 0.84(0.13) 0.89(0.09) 0.65(0.24) 0.64(0.04) 0.52(0.16) 0.38(0.14) 0.33(0.09) 0.34(0.14) 0.31(0.14) 0.33(0.29) 0.43(0.12) 0.35(0.10) 0.38(0.04) 0.42(0.08) 0.41(0.04) 0.36(0.06) 0.31(0.05) 0.41(0.12) 0.37(0.07) 0.24(0.16) 0.34(0.12) 0.41(0.09) 0.32(0.11) 0.35(0.03) 0.21(0.14) 0.19(0.04) 0.20(0.05) 0.15(0.08) 0.14(0.10) 0.25(0.15) 0.15(0.10) 0.18(0.06) 0.19(0.08) 0.11(0.09) 0.26(0.15) 0.21(0.06) 0.13(0.11) 0.21(0.11) 0.16(0.05) 0.22(0.08) 0.20(0.05) 0.08(0.19) 0.12(0.06) 0.16(0.13) 0.05(0.17) 0.07(0.06) 0.05(0.08) 0.10(0.11) 0.11(0.05) 0.12(0.23) 0.07(0.07) 0.06(0.05) 0.07(0.06) 0.08(0.05) 0.06(0.04) 0.00(0.06) 0.06(0.06) 0.21(0.16) 0.07(0.26) 0.10(0.11) 0.14(0.10) 0.19(0.08) 0.31(0.12) 0.22(0.16) 0.30(0.13) 0.30(0.19) 0.53(0.33) 0.32(0.22) 0.63(0.32) 0.40(0.27) 0.67(0.30) 0.39(0.29) 0.53(0.15) 0.50(0.05) 0.41(0.11) 0.70(0.30) 0.38(0.33) 0.40(0.07) 0.39(0.10) 0.38(0.05) 0.44(0.14) 0.46(0.06) 0.38(0.10) 0.45(0.08) 0.45(0.05) 0.43(0.05) 0.43(0.04) 0.51(0.10) 0.49(0.05) 0.53(0.07) 0.52(0.06) 0.72(0.21) 0.54(0.19) 0.69(0.15) 0.79(0.11) 0.58(0.23) 0.86(0.28) 0.75(0.13) 1.00(0.26) 0.86(0.15) 0.78(0.10) 0.53(0.26) 0.76(0.24) 0.68(0.10) 0.82(0.14) 0.80(0.05) 0.72(0.09) 0.77(0.06) 0.88(0.11) 0.94(0.07) 0.93(0.03) 0.97(0.06) 1.01(0.06) 0.80(0.23) 1.06(0.28) 0.79(0.27) 0.92(0.14) 0.87(0.08) 0.87(0.04) 0.90(0.04) 0.85(0.07) 1.02(0.16) 1.06(0.05) 1.08(0.05) 1.18(0.11) 0.91(0.28) ++ Max displacement in automask = 2.92 (mm) at sub-brick 24 ++ Max delta displ in automask = 0.78 (mm) at sub-brick 6 ++ Wrote dataset to disk in ./rm.epi.volreg.r01+orig.BRIK 3dcalc -overwrite -a pb01.sub-60068.r01.tshift+orig -expr 1 -prefix rm.epi.all1 ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands cat_matvec -ONELINE anatQQ.sub-60068.aff12.1D anatSS.sub-60068_al_junk_mat.aff12.1D -I mat.r01.vr.aff12.1D 3dNwarpApply -master anatQQ.sub-60068+tlrc -dxyz 3 -source pb01.sub-60068.r01.tshift+orig -nwarp anatQQ.sub-60068_WARP.nii mat.r01.warp.aff12.1D -prefix rm.epi.nomask.r01 ++ 3dNwarpApply: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Warped ++ -master dataset is 'anatQQ.sub-60068+tlrc' ++ output grid size = 3 mm *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./pb01.sub-60068.r01.tshift+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./pb01.sub-60068.r01.tshift+orig.BRIK is 33.815468 degrees from plumb. ++ opened source dataset 'pb01.sub-60068.r01.tshift+orig' ++ Processing -nwarp ++ Warping:.................................................Z ++ total Elapsed time = 560.1 sec 3dNwarpApply -master anatQQ.sub-60068+tlrc -dxyz 3 -source rm.epi.all1+orig -nwarp anatQQ.sub-60068_WARP.nii mat.r01.warp.aff12.1D -interp cubic -ainterp NN -quiet -prefix rm.epi.1.r01 ++ 3dNwarpApply: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Warped ++ -master dataset is 'anatQQ.sub-60068+tlrc' ++ output grid size = 3 mm *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./rm.epi.all1+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./rm.epi.all1+orig.BRIK is 33.815468 degrees from plumb. ++ opened source dataset 'rm.epi.all1+orig' 3dTstat -min -prefix rm.epi.min.r01 rm.epi.1.r01+tlrc ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox end cat dfile.r01.1D 3dcopy rm.epi.min.r01+tlrc mask_epi_extents ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] foreach run ( 01 ) 3dcalc -a rm.epi.nomask.r01+tlrc -b mask_epi_extents+tlrc -expr a*b -prefix pb02.sub-60068.r01.volreg ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands end cat_matvec -ONELINE anatQQ.sub-60068.aff12.1D anatSS.sub-60068_al_junk_mat.aff12.1D -I 3dNwarpApply -master anatQQ.sub-60068+tlrc -dxyz 3 -source vr_base_min_outlier+orig -nwarp anatQQ.sub-60068_WARP.nii mat.basewarp.aff12.1D -prefix final_epi_vr_base_min_outlier ++ 3dNwarpApply: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Warped ++ -master dataset is 'anatQQ.sub-60068+tlrc' ++ output grid size = 3 mm *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./vr_base_min_outlier+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./vr_base_min_outlier+orig.BRIK is 33.815468 degrees from plumb. ++ opened source dataset 'vr_base_min_outlier+orig' ++ Processing -nwarp ++ Warping:.Z ++ total Elapsed time = 7.2 sec 3dcopy anatQQ.sub-60068+tlrc anat_final.sub-60068 ++ 3dcopy: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] 3dAllineate -base final_epi_vr_base_min_outlier+tlrc -allcostX -input anat_final.sub-60068+tlrc tee out.allcostX.txt ++ 3dAllineate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Registrator ++ Source dataset: ./anat_final.sub-60068+tlrc.HEAD ++ Base dataset: ./final_epi_vr_base_min_outlier+tlrc.HEAD ++ Loading datasets into memory ++ Local correlation: blok type = 'TOHD(15.531)' + -cmass x y z shifts = 0.863 -1.595 -9.246 + shift search range is +/- = 68.373 86.670 73.188 ++ OpenMP thread count = 8 + initial Parameters = 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 1.0000 1.0000 1.0000 0.0000 0.0000 0.0000 ++ allcost output: init #0 ls = 0.198199 sp = 0.350094 mi = 2.41676 crM = 0.102171 nmi = 0.846942 je = 2.41676 hel = -0.0810095 crA = 0.321847 crU = 0.284237 lss = 0.801801 lpc = 0.27019 lpa = 0.72981 lpc+ = 0.457457 lpa+ = 0.917078 ++ 3dAllineate: total CPU time = 0.0 sec Elapsed = 2.1 ++ ########################################################### 3dNwarpApply -source copy_af_anat_w_skull+orig -master anat_final.sub-60068+tlrc -ainterp wsinc5 -nwarp anatQQ.sub-60068_WARP.nii anatQQ.sub-60068.aff12.1D -prefix follow_anat_anat_w_skull ++ 3dNwarpApply: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Zhark the Warped *+ WARNING: If you are performing spatial transformations on an oblique dset, such as ./copy_af_anat_w_skull+orig.BRIK, or viewing/combining it with volumes of differing obliquity, you should consider running: 3dWarp -deoblique on this and other oblique datasets in the same session. See 3dWarp -help for details. ++ Oblique dataset:./copy_af_anat_w_skull+orig.BRIK is 2.600002 degrees from plumb. ++ opened source dataset 'copy_af_anat_w_skull+orig' ++ -master dataset is 'anat_final.sub-60068+tlrc' ++ Processing -nwarp ++ Warping:.Z ++ total Elapsed time = 7.3 sec @radial_correlate -nfirst 0 -polort 4 -do_clean yes -rdir radcor.pb02.volreg pb02.sub-60068.r01.volreg+tlrc.HEAD ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 10.4 s ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark -- radcor: detrend -polort 4, new eset = det.r01 input : epi.r01+tlrc ++ 3dTproject: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Cox the Algebraic (Linear) ++ Setting up regressors ++ 1 Blocks * 5 polynomials -- 5 polort regressors ++ 242 retained time points MINUS 5 regressors ==> 237 D.O.F. left ++ no -mask option ==> processing all 311296 voxels in dataset ++ 3dTproject input data :: 74553 vectors are constant -- radcor: running correlation on dataset pb02.sub-60068.r01.volreg+tlrc.HEAD ... ++ radcor: merge blur: rad 20, FWHM 40 ++ 3dmerge: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ default -1dindex = 0 ++ default -1tindex = 1 Program 3dmerge 3dmerge: edit and combine 3D datasets, by RW Cox ++ editing input dataset in memory (287.4 MB) ++ edt_blur: sigx 16.9864, dx 3, fwhm 40, sfac 2.5, firx 15 .................................................................................................................................................................................................................................................. -- Wrote edited dataset: ./sphere.mean.20.r01+tlrc.BRIK ++ 3dTcorrelate: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Wrote dataset: ./radcor.20.r01.corr+tlrc.BRIK ++ 3dbucket: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ---- radcor: done ++ have do_clean, cleaning up... foreach run ( 01 ) 3dAutomask -prefix rm.mask_r01 pb02.sub-60068.r01.volreg+tlrc ++ 3dAutomask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: Emperor Zhark ++ Loading dataset pb02.sub-60068.r01.volreg+tlrc ++ Forming automask + Fixed clip level = 380.455383 + Used gradual clip level = 336.576508 .. 445.191956 + Number voxels above clip level = 69272 + Clustering voxels ... + Largest cluster has 68549 voxels + Clustering voxels ... + Largest cluster has 68128 voxels + Filled 588 voxels in small holes; now have 68716 voxels + Filled 1 voxels in large holes; now have 68717 voxels + Clustering voxels ... + Largest cluster has 68716 voxels + Clustering non-brain voxels ... + Clustering voxels ... + Largest cluster has 242538 voxels + Mask now has 68758 voxels ++ 68758 voxels in the mask [out of 311296: 22.09%] ++ first 9 x-planes are zero [from L] ++ last 8 x-planes are zero [from R] ++ first 7 y-planes are zero [from P] ++ last 5 y-planes are zero [from A] ++ first 0 z-planes are zero [from I] ++ last 6 z-planes are zero [from S] ++ CPU time = 0.000000 sec end 3dmask_tool -inputs rm.mask_r01+tlrc.HEAD -union -prefix full_mask.sub-60068 ++ processing 1 input dataset(s), NN=2... ++ padding all datasets by 0 (for dilations) ++ have 1 volume of input, no combining ++ frac 0 over 1 volumes gives min count 0 ++ voxel limits: 0 clipped, 68758 survived, 242538 were zero ++ writing result full_mask.sub-60068... 3dresample -master full_mask.sub-60068+tlrc -input anatQQ.sub-60068+tlrc -prefix rm.resam.anat 3dmask_tool -dilate_input 5 -5 -fill_holes -input rm.resam.anat+tlrc -prefix mask_anat.sub-60068 ++ processing 1 input dataset(s), NN=2... ++ padding all datasets by 5 (for dilations) ++ have 1 volume of input, no combining ++ frac 0 over 1 volumes gives min count 0 ++ voxel limits: 0 clipped, 76030 survived, 235266 were zero ++ filled 0 holes (0 voxels) ++ writing result mask_anat.sub-60068... 3dmask_tool -input full_mask.sub-60068+tlrc mask_anat.sub-60068+tlrc -inter -prefix mask_epi_anat.sub-60068 ++ processing 2 input dataset(s), NN=2... ++ padding all datasets by 0 (for dilations) ++ have 2 volumes of input to combine ++ frac 1 over 2 volumes gives min count 2 ++ voxel limits: 15222 clipped, 64783 survived, 231291 were zero ++ writing result mask_epi_anat.sub-60068... 3dABoverlap -no_automask full_mask.sub-60068+tlrc mask_anat.sub-60068+tlrc tee out.mask_ae_overlap.txt ++ 3dABoverlap: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] #A=./full_mask.sub-60068+tlrc.BRIK B=./mask_anat.sub-60068+tlrc.BRIK #A #B #(A uni B) #(A int B) #(A \ B) #(B \ A) %(A \ B) %(B \ A) Rx(B/A) Ry(B/A) Rz(B/A) 68758 76030 80005 64783 3975 11247 5.7811 14.7928 1.1335 0.9448 0.9982 3ddot -dodice full_mask.sub-60068+tlrc mask_anat.sub-60068+tlrc tee out.mask_ae_dice.txt 0.894867 3dresample -master mask_epi_anat.sub-60068+tlrc -prefix ./rm.resam.group -input /data/NIMH_SSCC/ptaylor/REF_TEMPLATES/MNI152_2009_template_SSW.nii.gz[0] 3dmask_tool -dilate_input 5 -5 -fill_holes -input rm.resam.group+tlrc -prefix mask_group ++ processing 1 input dataset(s), NN=2... ++ padding all datasets by 5 (for dilations) ++ have 1 volume of input, no combining ++ frac 0 over 1 volumes gives min count 0 ++ voxel limits: 0 clipped, 71053 survived, 240243 were zero ++ filled 0 holes (0 voxels) ++ writing result mask_group... 3ddot -dodice mask_anat.sub-60068+tlrc mask_group+tlrc tee out.mask_at_dice.txt 0.965822 foreach run ( 01 ) 3dBlurInMask -preserve -FWHM 6.0 -Mmask mask_epi_anat.sub-60068+tlrc -prefix pb03.sub-60068.r01.blur pb02.sub-60068.r01.volreg+tlrc ++ 3dBlurInMask: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox ++ 1 unique nonzero values in -Mmask; 64783 nonzero voxels ++ forcing output to be stored in float format + voxels in Mmask[1] = 64783 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 ++ mri_blur3D: #iter=6 fx=0.03006 fy=0.03006 fz=0.03006 end foreach run ( 01 ) 3dTstat -prefix rm.mean_r01 pb03.sub-60068.r01.blur+tlrc ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox 3dcalc -a pb03.sub-60068.r01.blur+tlrc -b rm.mean_r01+tlrc -c mask_epi_extents+tlrc -expr c * min(200, a/b*100)*step(a)*step(b) -prefix pb04.sub-60068.r01.scale ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands end 1d_tool.py -infile dfile_rall.1D -set_nruns 1 -demean -write motion_demean.1D 1d_tool.py -infile dfile_rall.1D -set_nruns 1 -derivative -demean -write motion_deriv.1D 1d_tool.py -infile motion_demean.1D -set_nruns 1 -split_into_pad_runs mot_demean 1d_tool.py -infile dfile_rall.1D -set_nruns 1 -show_censor_count -censor_prev_TR -censor_motion 0.3 motion_sub-60068 total number of censored TRs (simple form) = 10 1deval -a motion_sub-60068_censor.1D -b outcount_sub-60068_censor.1D -expr a*b 3dresample -master final_epi_vr_base_min_outlier+tlrc -rmode NN -input ROI_import_MNI_2009c_asym+tlrc -prefix ROI_import_MNI_2009c_asym_resam 3drefit -copytables ROI_import_MNI_2009c_asym+tlrc ROI_import_MNI_2009c_asym_resam+tlrc ++ 3drefit: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox ++ Processing AFNI dataset ROI_import_MNI_2009c_asym_resam+tlrc + copy tabledata ++ 3drefit processed 1 datasets 3drefit -cmap INT_CMAP ROI_import_MNI_2009c_asym_resam+tlrc ++ 3drefit: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox ++ Processing AFNI dataset ROI_import_MNI_2009c_asym_resam+tlrc ++ 3drefit processed 1 datasets 1d_tool.py -infile censor_sub-60068_combined_2.1D -show_trs_uncensored space set ktrs = 1dcat out.keep_trs_rall.txt 3dDeconvolve -input pb04.sub-60068.r01.scale+tlrc.HEAD -censor censor_sub-60068_combined_2.1D -ortvec mot_demean.r01.1D mot_demean_r01 -polort 4 -num_stimts 2 -stim_times_AM1 1 stimuli/times.CONTROL.txt dmBLOCK -stim_label 1 CONTROL -stim_times_AM1 2 stimuli/times.TASK.txt dmBLOCK -stim_label 2 TASK -jobs 8 -gltsym SYM: TASK -CONTROL -glt_label 1 T-C -gltsym SYM: 0.5*TASK +0.5*CONTROL -glt_label 2 meanTC -tout -x1D X.xmat.1D -xjpeg X.jpg -x1D_uncensored X.nocensor.xmat.1D -errts errts.sub-60068 -x1D_stop -bucket stats.sub-60068 ++ '-stim_times_AM1 1 stimuli/times.CONTROL.txt' has 1 auxiliary values per time point ++ '-stim_times_AM1 1': basis function model 'dmBLOCK' uses 1 parameters, out of the 1 found in timing file 'stimuli/times.CONTROL.txt' ++ '-stim_times_AM1 2 stimuli/times.TASK.txt' has 1 auxiliary values per time point ++ '-stim_times_AM1 2': basis function model 'dmBLOCK' uses 1 parameters, out of the 1 found in timing file 'stimuli/times.TASK.txt' ++ 3dDeconvolve extending num_stimts from 2 to 8 due to -ortvec ++ 3dDeconvolve: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: B. Douglas Ward, et al. ++ STAT automask has 284238 voxels (out of 311296 = 91.3%) ++ Skipping check for initial transients ++ Input polort=4; Longest run=484.0 s; Recommended minimum polort=4 ++ OK ++ ++ -stim_times using TR=2 s for stimulus timing conversion ++ -stim_times using TR=2 s for any -iresp output datasets ++ [you can alter the -iresp TR via the -TR_times option] ++ ** -stim_times NOTE ** guessing GLOBAL times if 1 time per line; LOCAL otherwise ++ ** GUESSED ** -stim_times_AM1 1 using LOCAL times ++ ** GUESSED ** -stim_times_AM1 2 using LOCAL times ------------------------------------------------------------ GLT matrix from 'SYM: TASK -CONTROL': 0 0 0 0 0 -1 1 0 0 0 0 0 0 ------------------------------------------------------------ GLT matrix from 'SYM: 0.5*TASK +0.5*CONTROL': 0 0 0 0 0 0.5 0.5 0 0 0 0 0 0 ++ Number of time points: 242 (before censor) ; 232 (after) + Number of parameters: 13 [11 baseline ; 2 signal] ++ total shared memory needed = 11,206,656 bytes (about 11 million) ++ mmap() memory allocated: 11,206,656 bytes (about 11 million) ++ Memory required for output bricks = 11,206,656 bytes (about 11 million) ++ Wrote matrix image to file X.jpg ++ Wrote matrix values to file X.xmat.1D ++ ========= Things you can do with the matrix file ========= ++ (a) Linear regression with ARMA(1,1) modeling of serial correlation: 3dREMLfit -matrix X.xmat.1D -input pb04.sub-60068.r01.scale+tlrc.HEAD \ -tout -Rbuck stats.sub-60068_REML -Rvar stats.sub-60068_REMLvar \ -Rerrts errts.sub-60068_REML -verb ++ N.B.: 3dREMLfit command above written to file stats.REML_cmd ++ (b) Visualization/analysis of the matrix via ExamineXmat.R ++ (c) Synthesis of sub-model datasets using 3dSynthesize ++ ========================================================== ++ Wrote matrix values to file X.nocensor.xmat.1D ++ ----- Signal+Baseline matrix condition [X] (232x13): 5.9054 ++ VERY GOOD ++ ++ ----- Signal-only matrix condition [X] (232x2): 1.08102 ++ VERY GOOD ++ ++ ----- Baseline-only matrix condition [X] (232x11): 5.89659 ++ VERY GOOD ++ ++ ----- stim_base-only matrix condition [X] (232x6): 5.36899 ++ VERY GOOD ++ ++ ----- polort-only matrix condition [X] (232x5): 1.1807 ++ VERY GOOD ++ ++ 3dDeconvolve exits: -x1D_stop option was invoked if ( 0 != 0 ) then 1d_tool.py -show_cormat_warnings -infile X.xmat.1D tee out.cormat_warn.txt Warnings regarding Correlation Matrix: X.xmat.1D severity correlation cosine regressor pair -------- ----------- ------ ---------------------------------------- medium: -0.439 0.155 ( 5 vs. 6) CONTROL#0 vs. TASK#0 1d_tool.py -show_xmat_warnings -infile X.xmat.1D tee out.xmat_warn.txt 1d_tool.py -show_df_info -infile X.xmat.1D tee out.df_info.txt initial DF : 242 : 100.0% DF used for regs of interest : 2 : 0.8% DF used for censoring : 10 : 4.1% DF used for polort : 5 : 2.1% DF used for motion : 6 : 2.5% total DF used : 23 : 9.5% final DF : 219 : 90.5% tcsh -x stats.REML_cmd 3dREMLfit -matrix X.xmat.1D -input pb04.sub-60068.r01.scale+tlrc.HEAD -tout -Rbuck stats.sub-60068_REML -Rvar stats.sub-60068_REMLvar -Rerrts errts.sub-60068_REML -verb ++ 3dREMLfit: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RWCox ++ Number of OpenMP threads = 8 ++ No mask ==> computing for all 311296 voxels ++ FDR automask has 284238 voxels (out of 311296 = 91.3%) ++ ----- matrix condition (232x13): 5.9054 ++ VERY GOOD ++ + masked off 74566 voxels for being all zero; 236730 left in mask ++ Converting input dataset to vector image + dataset = 301 million bytes + vectim = 230 million bytes ++ starting REML setup calculations; total CPU=0.00 Elapsed=5.21 + X matrix: 95.458% of elements are nonzero + starting 8 OpenMP threads for REML setup + REML setup finished: matrix rows=232 cols=13; 109*1 cases; total CPU=0.00 Elapsed=5.22 + average case bandwidth = 16.53 ++ REML voxel loop: [8 threads]0123456789.0123456789.0123456789.012345678 + ARMA voxel parameters estimated: total CPU=0.00 Elapsed=23.76 ++ Ljung-Box max lag parameter h = 31 (29 chi-squared DOF) ++ GLSQ loop:0123456789.0123456789.0123456789.0123456789.0123456789. + GLSQ regression done: total CPU=0.00 Elapsed=37.67 ++ creating FDR curves in dataset stats.sub-60068_REML+tlrc ++ Smallest FDR q [0 Full_Fstat] = 1.31774e-11 ++ Smallest FDR q [2 CONTROL#0_Tstat] = 0.00388884 ++ Smallest FDR q [4 TASK#0_Tstat] = 9.00683e-12 ++ Smallest FDR q [6 T-C#0_Tstat] = 8.43664e-07 ++ Smallest FDR q [8 meanTC#0_Tstat] = 5.5955e-11 + Added 5 FDR curves to dataset stats.sub-60068_REML+tlrc + unloading input dataset and REML matrices ++ 3dREMLfit is all done! total CPU=0.00 Elapsed=51.62 if ( 0 != 0 ) then 3dTcat -prefix all_runs.sub-60068 pb04.sub-60068.r01.scale+tlrc.HEAD ++ 3dTcat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ elapsed time = 10.1 s 3dTstat -mean -prefix rm.signal.all all_runs.sub-60068+tlrc[1dcat out.keep_trs_rall.txt] ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox 3dTstat -stdev -prefix rm.noise.all errts.sub-60068_REML+tlrc[1dcat out.keep_trs_rall.txt] ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox 3dcalc -a rm.signal.all+tlrc -b rm.noise.all+tlrc -expr a/b -prefix TSNR.sub-60068 ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands compute_ROI_stats.tcsh -out_dir tsnr_stats_regress -stats_file tsnr_stats_regress/stats_auto_brain.txt -dset_ROI mask_epi_anat.sub-60068+tlrc -dset_data TSNR.sub-60068+tlrc -rset_label brain -rval_list 1 ++ writing stats text to tsnr_stats_regress/stats_auto_brain.txt dset: brain (mask_epi_anat.sub-60068), Nroi: 1 ---------------------------------------------- ROI Nvox Nzer Dvox Tmin T25% Tmed T75% Tmax X Y Z ROI_name --- ---- ---- ---- ---- ---- ---- ---- ---- ----- ----- ----- -------- 1 64783 0 15.4 8 150 200 248 566 -1.5 37.5 28.5 NONE compute_ROI_stats.tcsh -out_dir tsnr_stats_regress -stats_file tsnr_stats_regress/stats_auto_MNI_2009c_asym.txt -dset_ROI ROI_import_MNI_2009c_asym_resam+tlrc -dset_data TSNR.sub-60068+tlrc -rset_label MNI_2009c_asym -rval_list ALL_LT ++ replacing ALL_LT with 12 entries from ROI_import_MNI_2009c_asym_resam+tlrc 10 11 12 13 14 20 21 22 23 24 30 31 ++ writing stats text to tsnr_stats_regress/stats_auto_MNI_2009c_asym.txt dset: MNI_2009c_asym (ROI_import_MNI_2009c_asym_resam), Nroi: 12 ---------------------------------------------------------------- ROI Nvox Nzer Dvox Tmin T25% Tmed T75% Tmax X Y Z ROI_name --- ---- ---- ---- ---- ---- ---- ---- ---- ----- ----- ----- -------- 10 252 0 1.7 5 135 197 243 464 4.5 91.5 1.5 SYAF-LH_VisCent_Striate_1 11 602 1 2.2 1 163 213 242 358 43.5 19.5 58.5 SYAF-LH_SomMotA_1 12 465 0 2.2 89 157 178 204 295 7.5 -13.5 37.5 SYAF-LH_SalVentAttnB_PFCmp_1 13 786 0 2.8 2 8 14 33 204 7.5 -16.5 -19.5 SYAF-LH_LimbicB_OFC_1 14 1142 0 2.4 0 10 30 98 192 22.5 7.5 -28.5 SYAF-LH_LimbicA_TempPole_1 20 499 0 2.0 10 136 181 220 328 -10.5 82.5 7.5 GHCP-R_Primary_Visual_Cortex 21 161 0 1.0 102 176 220 262 365 -13.5 31.5 82.5 GHCP-R_Primary_Sensory_Cortex 22 58 0 1.7 149 166 182 196 243 -4.5 -22.5 31.5 GHCP-R_Anterior_24_prime 23 194 0 2.0 2 9 16 24 93 -10.5 -25.5 -22.5 GHCP-R_Orbital_Frontal_Complex 24 384 0 2.2 1 17 34 90 167 -40.5 -19.5 -31.5 GHCP-R_Area_TG_dorsal 30 107 0 1.7 5 27 102 143 185 -25.5 1.5 -19.5 JULI-RH_Amygdala 31 20 0 1.0 9 24 34 73 178 -4.5 -10.5 -4.5 JULI-RH_Accumbens 3dTnorm -norm2 -prefix rm.errts.unit errts.sub-60068_REML+tlrc ++ 3dTnorm: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RW Cox 3dmaskave -quiet -mask mask_epi_anat.sub-60068+tlrc rm.errts.unit+tlrc ++ 3dmaskave: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] +++ 64783 voxels survive the mask 3dTstat -sos -prefix - mean.errts.unit.1D' ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox echo -- GCOR = `cat out.gcor.1D` cat out.gcor.1D -- GCOR = 0.0495456 3dmaskave -quiet -mask mask_epi_anat.sub-60068+tlrc errts.sub-60068_REML+tlrc ++ 3dmaskave: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] +++ 64783 voxels survive the mask 3dTcorr1D -prefix corr_brain errts.sub-60068_REML+tlrc mean.errts.1D ++ 3dTcorr1D: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] + reading dataset file errts.sub-60068_REML+tlrc + reading 1D file mean.errts.1D + loading dataset ./errts.sub-60068_REML+tlrc.BRIK into memory ++ Start correlations: 311296 voxels X 1 time series(242); 1 threads ++ THD_Tcorr1D: 74566 voxels skipped because were constant in time ++ Wrote dataset: ./corr_brain+tlrc.BRIK 3dcalc -a all_runs.sub-60068+tlrc -b errts.sub-60068_REML+tlrc -expr a-b -prefix fitts.sub-60068_REML ++ 3dcalc: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: A cast of thousands 1dcat X.nocensor.xmat.1D[5] 1dcat X.nocensor.xmat.1D[6] 1d_tool.py -infile X.nocensor.xmat.1D -write_xstim X.stim.xmat.1D 3dTstat -sum -prefix sum_ideal.1D X.stim.xmat.1D ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox ++ Output dataset ./sum_ideal.1D touch blur_est.sub-60068.1D mkdir files_ACF touch blur.err_reml.1D foreach run ( 01 ) set trs = `1d_tool.py -infile X.xmat.1D -show_trs_uncensored encoded -show_trs_run $run` 1d_tool.py -infile X.xmat.1D -show_trs_uncensored encoded -show_trs_run 01 if ( 2..4,7,10,11,16..241 == ) continue 3dFWHMx -detrend -mask mask_epi_anat.sub-60068+tlrc -ACF files_ACF/out.3dFWHMx.ACF.err_reml.r01.1D errts.sub-60068_REML+tlrc[2..4,7,10,11,16..241] ++ 3dFWHMx: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: The Bob ++ Number of voxels in mask = 64783 ++ detrending start: 17 baseline funcs, 232 time points + detrending done (0.00 CPU s thus far) ++ start ACF calculations out to radius = 20.72 mm + ACF done (0.00 CPU s thus far) ++ ACF 1D file [radius ACF mixed_model gaussian_NEWmodel] written to files_ACF/out.3dFWHMx.ACF.err_reml.r01.1D ++ 1dplot: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: RWC et al. + and 1dplot-ed to file files_ACF/out.3dFWHMx.ACF.err_reml.r01.1D.png end set blurs = ( `3dTstat -mean -prefix - blur.err_reml.1D'{0..$(2)}'\'` ) 3dTstat -mean -prefix - blur.err_reml.1D{0..$(2)}' ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox echo average err_reml FWHM blurs: 0 0 0 0 average err_reml FWHM blurs: 0 0 0 0 echo 0 0 0 0 # err_reml FWHM blur estimates set blurs = ( `3dTstat -mean -prefix - blur.err_reml.1D'{1..$(2)}'\'` ) 3dTstat -mean -prefix - blur.err_reml.1D{1..$(2)}' ++ 3dTstat: AFNI version=AFNI_26.3.01 (Oct 8 2026) [64-bit] ++ Authored by: KR Hammett & RW Cox echo average err_reml ACF blurs: 0.714264 3.88684 12.7153 10.0887 average err_reml ACF blurs: 0.714264 3.88684 12.7153 10.0887 echo 0.714264 3.88684 12.7153 10.0887 # err_reml ACF blur estimates gen_epi_review.py -script @epi_review.sub-60068 -dsets pb00.sub-60068.r01.tcat+orig.HEAD cat cat out.ap_uvars.txt afni_python_wrapper.py -eval data_file_to_json() gen_ss_review_scripts.py -exit0 -init_uvars_json out.ap_uvars.json -write_uvars_json out.ss_review_uvars.json ++ writing ss review basic: @ss_review_basic ++ writing ss review driver: @ss_review_driver ++ writing ss review drive commands: @ss_review_driver_commands rm -f rm.epi.1.r01+tlrc.BRIK.gz rm.epi.1.r01+tlrc.HEAD rm.epi.all1+orig.BRIK.gz rm.epi.all1+orig.HEAD rm.epi.min.r01+tlrc.BRIK.gz rm.epi.min.r01+tlrc.HEAD rm.epi.nomask.r01+tlrc.BRIK.gz rm.epi.nomask.r01+tlrc.HEAD rm.epi.volreg.r01+orig.BRIK.gz rm.epi.volreg.r01+orig.HEAD rm.errts.unit+tlrc.BRIK.gz rm.errts.unit+tlrc.HEAD rm.mask_r01+tlrc.BRIK.gz rm.mask_r01+tlrc.HEAD rm.mean_r01+tlrc.BRIK.gz rm.mean_r01+tlrc.HEAD rm.noise.all+tlrc.BRIK.gz rm.noise.all+tlrc.HEAD rm.out.cen.r01.1D rm.resam.anat+tlrc.BRIK.gz rm.resam.anat+tlrc.HEAD rm.resam.group+tlrc.BRIK.gz rm.resam.group+tlrc.HEAD rm.signal.all+tlrc.BRIK.gz rm.signal.all+tlrc.HEAD if ( -e @ss_review_basic ) then ./@ss_review_basic tee out.ss_review.sub-60068.txt subject ID : sub-60068 AFNI version : AFNI_26.3.01 AFNI package : linux_rocky_8 TR : 2.0 TRs removed (per run) : 0 multiband level : 1 slice timing pattern : alt+z2 num stim classes provided : 2 final anatomy dset : anat_final.sub-60068+tlrc.HEAD final stats dset : stats.sub-60068_REML+tlrc.HEAD orig voxel counts : 64 64 34 orig voxel resolution : 3.000000 3.000000 4.000000 orig volume center : -0.842407 -50.593674 -21.783020 final voxel resolution : 3.000000 3.000000 3.000000 motion limit : 0.3 num TRs above mot limit : 6 average motion (per TR) : 0.0763548 average censored motion : 0.068823 max motion displacement : 2.02663 max censored displacement : 2.02663 outlier limit : 0.05 average outlier frac (TR) : 0.00264839 num TRs above out limit : 2 flip guess : NO_FLIP num runs found : 1 num TRs per run : 242 num TRs per run (applied) : 232 num TRs per run (censored): 10 fraction censored per run : 0.0413223 TRs total (uncensored) : 242 TRs total : 232 degrees of freedom used : 13 degrees of freedom left : 219 final DF fraction : 0.904959 TRs censored : 10 censor fraction : 0.041322 num regs of interest : 2 num TRs per stim (orig) : 135 208 num TRs censored per stim : 9 7 fraction TRs censored : 0.067 0.034 ave mot per sresp (orig) : 0.084705 0.073058 ave mot per sresp (cens) : 0.071433 0.066278 TSNR average : 199.471 global correlation (GCOR) : 0.0495456 anat/EPI mask Dice coef : 0.894867 anat/templ mask Dice coef : 0.965822 maximum F-stat (masked) : 54.0823 blur estimates (ACF) : 0.714264 3.88684 12.7153 blur estimates (FWHM) : 0 0 0 apqc_make_tcsh.py -review_style pythonic -subj_dir . -uvar_json out.ss_review_uvars.json ++ Done making (executable) IC errts script: run_instacorr_errts.tcsh ++ Done making (executable) GV errts script: run_graphview_errts.tcsh ++ Done making (executable) IC pbrun script: run_instacorr_pbrun.tcsh ++ Done making (executable) GV pbrun script: run_graphview_pbrun.tcsh ++ APQC create: qc_00_vorig_EPI ++ APQC create: qc_01_vorig_EPI_variance ++ APQC create: qc_02_vorig_anat ++ APQC create: qc_03_vorig_olap ++ APQC create: qc_04_ve2a_epi2anat ++ APQC create: qc_05_va2t_anat2temp ++ APQC create: qc_06_va2t_mask2final ++ Found 5 stats items to use for vstat QC block ++ APQC create: qc_07_vstat_Full_Fstat ++ APQC create: qc_08_vstat_CONTROL_0_Coef ++ APQC create: qc_09_vstat_TASK_0_Coef ++ APQC create: qc_10_vstat_T-C_0_Coef ++ APQC create: qc_11_vstat_meanTC_0_Coef ++ APQC create: qc_12_mot_enormoutlr ++ APQC create: qc_13_mot_VR6 ++ APQC create: qc_14_mot_grayplot ++ APQC create: qc_15_regr_ideal ++ APQC create: qc_16_regr_stims ++ APQC create: qc_17_regr_df ++ APQC create: qc_18_regr_corr_errts ++ APQC create: qc_19_regr_tsnr_fin ++ APQC create: qc_20_regr_roi_tsnr_fin ++ APQC create: qc_21_radcor_rc_tcat run: r01/1 ++ APQC create: qc_22_radcor_rc_volreg run: r01/1 ++ APQC create: qc_23_warns_xmat ++ APQC create: qc_24_warns_cen_total ++ APQC create: qc_25_warns_cen_stim ++ APQC create: qc_26_warns_press ++ APQC create: qc_27_warns_sat_4095 ++ APQC create: qc_28_warns_flip ++ APQC create: qc_29_warns_vlines ++ APQC create: qc_30_qsumm_ssrev ++ APQC create: copy jsons to info dir ++ APQC create: copy ss_review_basic file ++ APQC create: display ss_review_basic info subject ID : sub-60068 AFNI version : AFNI_26.3.01 AFNI package : linux_rocky_8 TR : 2.0 TRs removed (per run) : 0 multiband level : 1 slice timing pattern : alt+z2 num stim classes provided : 2 final anatomy dset : anat_final.sub-60068+tlrc.HEAD final stats dset : stats.sub-60068_REML+tlrc.HEAD orig voxel counts : 64 64 34 orig voxel resolution : 3.000000 3.000000 4.000000 orig volume center : -0.842407 -50.593674 -21.783020 final voxel resolution : 3.000000 3.000000 3.000000 motion limit : 0.3 num TRs above mot limit : 6 average motion (per TR) : 0.0763548 average censored motion : 0.068823 max motion displacement : 2.02663 max censored displacement : 2.02663 outlier limit : 0.05 average outlier frac (TR) : 0.00264839 num TRs above out limit : 2 flip guess : NO_FLIP num runs found : 1 num TRs per run : 242 num TRs per run (applied) : 232 num TRs per run (censored): 10 fraction censored per run : 0.0413223 TRs total (uncensored) : 242 TRs total : 232 degrees of freedom used : 13 degrees of freedom left : 219 final DF fraction : 0.904959 TRs censored : 10 censor fraction : 0.041322 num regs of interest : 2 num TRs per stim (orig) : 135 208 num TRs censored per stim : 9 7 fraction TRs censored : 0.067 0.034 ave mot per sresp (orig) : 0.084705 0.073058 ave mot per sresp (cens) : 0.071433 0.066278 TSNR average : 199.471 global correlation (GCOR) : 0.0495456 anat/EPI mask Dice coef : 0.894867 anat/templ mask Dice coef : 0.965822 maximum F-stat (masked) : 54.0823 blur estimates (ACF) : 0.714264 3.88684 12.7153 blur estimates (FWHM) : 0 0 0 # ++++++++++++++ Check output of @ss_review_basic ++++++++++++++ # ------------------------------------------------------------------ ------------------------------------------------------------------ ++ Done setting up QC dir: QC_sub-60068 To create the APQC HTML, run either this (from any location): apqc_make_html.py -qc_dir /lscratch/32397969/sub-60068/sub-60068.results/QC_sub-60068 ... or this (from the afni_proc.py results directory): apqc_make_html.py -qc_dir QC_sub-60068 apqc_make_html.py -qc_dir QC_sub-60068 ++ Done! Wrote QC HTML. To view, run either this (without server): afni_open -b /lscratch/32397969/sub-60068/sub-60068.results/QC_sub-60068/index.html ... or this (with server): open_apqc.py -infiles /lscratch/32397969/sub-60068/sub-60068.results/QC_sub-60068/index.html echo \nconsider running: \n consider running: echo open_apqc.py -infiles sub-60068.results/QC_sub-60068/index.html open_apqc.py -infiles sub-60068.results/QC_sub-60068/index.html echo endif cd .. echo execution finished: `date` date execution finished: Fri Oct 9 17:33:25 EDT 2026