#!/bin/tcsh -f

@global_parse `basename $0` "$*" ; if ($status) exit 0

set stat = 0
set RNS = `3dnewid -fun`
set log = /tmp/${RNS}.MLT.log
set COG = ""

if ("$1" == "") then
   goto HELP
endif

goto PARSE
RETURN_PARSE:

#Cut out early ? 
if ("$mode" == 1) then
   goto PUT_ATLAS_TABLE
else if ("$mode" == 2) then
   goto ADD_ATLAS_ENTRY
endif

if ($autolab == 1) then
   #Get unique set of values using 3dRank
   #Have to do it for each sub-brick and for now, labeltable will have
   #to be the same for all sub-bricks so you need to label accordingly
   #No time for this now....
endif     

if ($ltdset != '') then
    3dAttribute -ssep ' '  -name  VALUE_LABEL_DTABLE $ltdset \
      | sed 's/^VALUE_LABEL_DTABLE = //' 
    if ($status) then
      if (! $quiet_death) echo "Failed to find VALUE_LABEL_DTABLE"
      goto BEND
    endif
    goto END
endif

if ($showlabels) then
   if ($word_match == 1) set gopt = ("$gopt" "-w")
   if ($KeysLabel != '') then
      niccc -quiet '-#' -stdout file:$labeltable \
         | \grep $gopt $KeysLabel \
         | \sed 's/^ //g' | \sed 's/"//g' \
         | \cut -d ' ' -f 2
   else
      niccc -quiet '-#' -stdout file:$labeltable \
         | \grep -v '^#' | sed '/^$/d' \
         | \sed 's/^ //g' | \sed 's/"//g' \
         | \cut -d ' ' -f 2
   endif
   goto END
endif

if ($showkeys) then
   if ($word_match == 1) set gopt = ("$gopt" "-w")
   if ($KeysLabel != '') then
      niccc -quiet '-#' -stdout file:$labeltable \
         | \grep $gopt $KeysLabel \
         | \sed 's/^ //g' | \sed 's/"//g' \
         | \cut -d ' ' -f 1
   else
      niccc -quiet '-#' -stdout file:$labeltable \
         | \grep -v '^#' | sed '/^$/d' \
         | \sed 's/^ //g' | \sed 's/"//g' \
         | \cut -d ' ' -f 1
   endif
   goto END
endif

if ($maxkey) then
   niccc -quiet '-#' -stdout file:$labeltable \
         | \grep -v '^#' \
         | \sed 's/^ //g' | \sed 's/"//g' \
         | \cut -d ' ' -f 1 > __kk.1D
   set maxkey = `3dBrickStat -slow -max __kk.1D`
   \rm -f __kk.1D
   echo $maxkey
   goto END
endif


if ($KeysLabel != '') then
   if (! -f $labeltable) then
      if (! $quiet_death) echo "Error: $labeltable not found"
      goto BEND
   endif
   
   #get the numbers
   if ($word_match == 1) set gopt = ("$gopt" "-w")
   set keys = `niccc -quiet '-#' -stdout file:$labeltable \
      | \grep $gopt $KeysLabel \
      | \sed 's/^ //g' | \sed 's/"//g' \
      | \cut -d ' ' -f 1`
   
   if ($#keys < 1) then
      if (! $quiet_death) \
         echo "Error: Label $KeysLabel has no match in labeltable $labeltable"
      goto BEND
   endif
   
   if ($range) then
      set range = `3dBrickStat -slow -min -max  "1D:$keys"`
      echo $range
   else
      echo $keys
   endif
   goto END
endif

if ($LabelKey != '') then
   if (! -f $labeltable) then
      if (! $quiet_death) echo "Error: $labeltable not found"
      goto BEND
   endif
   
   #get the numbers
   set labels = `niccc -quiet '-#' -stdout file:$labeltable \
      | \grep '"'$LabelKey'"' \
      | \sed 's/^ //g' | \sed 's/"//g' \
      | \cut -d ' ' -f 2`
   
   if ($#labels < 1) then
      if (! $quiet_death) \
         echo "Error: Key $LabelKey has no match in labeltable $labeltable"
      goto BEND
   else if ($#labels > 1) then
      if (! $quiet_death)  \
echo "Error: Key $LabelKey has $#labels matches in labeltable $labeltable"
      goto BEND
   else
      echo $labels
   endif
   
   goto END
endif

MAKE_TABLE:
   if ($ltype != 'roi') goto  MAKE_TABLE_END
   set max_label = `1dcat "1D:$llistmax" | sort -rn`
   set max_label = $max_label[1]
   if ($max_label < 32) then
      set pbar = "ROI_i32"
   else if ($max_label < 64) then
      set pbar = "ROI_i64"
   else if ($max_label < 128) then
      set pbar = "ROI_i128"
   else
      set pbar = "ROI_i256"
   endif
   
   if ( -f /tmp/${RNS}.___lt.txt) rm -f /tmp/${RNS}.___lt.txt
   if ( -f /tmp/${RNS}.___ll.txt) rm -f /tmp/${RNS}.___ll.txt
   if ( -f /tmp/${RNS}.___kk.txt) rm -f /tmp/${RNS}.___kk.txt
   set cnt = 1
   set N_llist = `\wc -l TMPLIST_${RNS}_` ; set N_llist = $N_llist[1]
   while ($cnt <= $N_llist)
      set ll = `sed -n "${cnt}p" TMPLIST_${RNS}_`
      set inds = `count -digits 1 $llistmin[$cnt] $llistmax[$cnt]`
      if ($#inds > 1) then
         set ci = 1
         foreach ind ($inds)
            printf '"%d" "%s%02d"\n' $ind "$ll" $ci  \
               >> /tmp/${RNS}.___lt.txt
            if ($status) then
               echo "Error:"
               echo "printf command failed at: $ind $ll"
               echo ""
               goto BEND
            endif   
            printf '%d\n' $ind >> /tmp/${RNS}.___kk.txt
            printf '%s%02d\n' "$ll" $ci >> /tmp/${RNS}.___ll.txt
            @ ci ++
         end
      else
         printf '"%d" "%s"\n' $llistmin[$cnt] "$ll" \
               >> /tmp/${RNS}.___lt.txt
            if ($status) then
               echo "Error:"
               echo "printf command failed at: $llistmin[$cnt] $ll"
               echo ""
               goto BEND
            endif   
         printf '%d\n' $llistmin[$cnt] >> /tmp/${RNS}.___kk.txt
         printf '%s\n' "$ll" >> /tmp/${RNS}.___ll.txt
      endif
      @ cnt ++
   end
   
   set n = `wc -l /tmp/${RNS}.___ll.txt`
   set n = $n[1]
   uniq /tmp/${RNS}.___ll.txt > /tmp/${RNS}.___llu.txt
   set nu = `wc -l /tmp/${RNS}.___llu.txt`
   set nu = $nu[1]
   if ($nu < $n) then
      if (! $quiet_death) \
         echo "ERROR: `ccalc -i $n -$nu` Labels dropped because of duplicates"
      goto BEND
   endif
   set n = `wc -l /tmp/${RNS}.___kk.txt`
   set n = $n[1]
   uniq /tmp/${RNS}.___kk.txt > /tmp/${RNS}.___kku.txt
   set nu = `wc -l /tmp/${RNS}.___kku.txt`
   set nu = $nu[1]
   if ($nu < $n) then
      if (! $quiet_death) \
         echo "ERROR: `ccalc -i $n -$nu` Keys dropped because of duplicates"
      goto BEND
   endif
   
   
      printf '<VALUE_LABEL_DTABLE\n' > $labeltable
      printf 'ni_type="2*String"\n' >> $labeltable
      printf 'ni_dimen="%d"\n' $nu[1] >> $labeltable
      printf 'pbar_name="%s">\n' $pbar >> $labeltable
      uniq /tmp/${RNS}.___lt.txt >> $labeltable
      printf '</VALUE_LABEL_DTABLE>\n' >> $labeltable
   
PUT_TABLE:
   if ($target_dset != '') then
      3drefit -labeltable $labeltable $target_dset
   endif
   MAKE_TABLE_END:
   
MAKE_ATLAS_TABLE:
   if ($ltype != 'atlas') goto  MAKE_ATLAS_TABLE_END
   set max_label = `1dcat "1D:$llistmax" | sort -rn`
   set max_label = $max_label[1]
   if ($max_label < 32) then
      set pbar = "ROI_i32"
   else if ($max_label < 64) then
      set pbar = "ROI_i64"
   else if ($max_label < 128) then
      set pbar = "ROI_i128"
   else
      set pbar = "ROI_i256"
   endif
   
   if ( -f /tmp/${RNS}.___lt.txt) rm -f /tmp/${RNS}.___lt.txt
   if ( -f /tmp/${RNS}.___ll.txt) rm -f /tmp/${RNS}.___ll.txt
   if ( -f /tmp/${RNS}.___kk.txt) rm -f /tmp/${RNS}.___kk.txt
   set cnt = 1
   set N_llist = `\wc -l TMPLIST_${RNS}_` ; set N_llist = $N_llist[1]
   while ($cnt <= $N_llist)
      set ll = `sed -n "${cnt}p" TMPLIST_${RNS}_`
      set inds = `count -digits 1 $llistmin[$cnt] $llistmax[$cnt]`
      if ($#inds > 1) then
         set ci = 1
         foreach ind ($inds)
            printf '"%d" "%s%02d"\n' $ind "$ll" $ci  \
               >> /tmp/${RNS}.___lt.txt
            if ($status) then
               echo "Error:"
               echo "printf command failed at: $ind $ll"
               echo ""
               goto BEND
            endif   
            printf '%d\n' $ind >> /tmp/${RNS}.___kk.txt
            printf '%s%02d\n' "$ll" $ci >> /tmp/${RNS}.___ll.txt
            @ ci ++
         end
      else
         printf '"%d" "%s"\n' $llistmin[$cnt] "$ll" \
               >> /tmp/${RNS}.___lt.txt
         if ($status) then
            echo "Error:"
            echo "printf command failed at: $llistmin[$cnt] $ll"
            echo ""
            goto BEND
         endif   
         printf '%d\n' $llistmin[$cnt] >> /tmp/${RNS}.___kk.txt
         printf '%s\n' "$ll" >> /tmp/${RNS}.___ll.txt
      endif
      @ cnt ++
   end
   
   set n = `wc -l /tmp/${RNS}.___ll.txt`
   set n = $n[1]
   uniq /tmp/${RNS}.___ll.txt > /tmp/${RNS}.___llu.txt
   set nu = `wc -l /tmp/${RNS}.___llu.txt`
   set nu = $nu[1]
   if ($nu < $n) then
      if (! $quiet_death) \
         echo "ERROR: `ccalc -i $n -$nu` Labels dropped because of duplicates"
      goto BEND
   endif
   set n = `wc -l /tmp/${RNS}.___kk.txt`
   set n = $n[1]
   uniq /tmp/${RNS}.___kk.txt > /tmp/${RNS}.___kku.txt
   set nu = `wc -l /tmp/${RNS}.___kku.txt`
   set nu = $nu[1]
   if ($nu < $n) then
      if (! $quiet_death) \
         echo "ERROR: `ccalc -i $n -$nu` Keys dropped because of duplicates"
      goto BEND
   endif
   
   
      uniq /tmp/${RNS}.___lt.txt > /tmp/${RNS}.___ult.txt
      set ne = `wc -l /tmp/${RNS}.___ult.txt`
      printf '<atlas_point_list\n' > $labeltable
      printf ' ni_form="ni_group">\n\n' >> $labeltable
      foreach n (`count -digits 1 1 $ne[1] 1`)
         set lln = `sed -n ${n}p /tmp/${RNS}.___ult.txt`
         printf '<ATLAS_POINT\n data_type="atlas_point"\n' >> $labeltable
         printf ' STRUCT="%s"\n VAL=%s\n' "`echo $lln[2-]`" $lln[1] \
                              >> $labeltable
         printf ' OKEY=%s\n' $lln[1] >> $labeltable
         if ($COG) then
            # restricting range to a single value for this label line without quotes
            set cogval = `echo $lln[1] |tr -d \"`
            set cog = `3dCM $target_dset"<$cogval>"`
            printf ' GYoAR="0"\n COG="%s %s %s"\n' $cog >> $labeltable
         else
            printf ' GYoAR="0"\n COG="0.0 0.0 0.0"\n' >> $labeltable
         endif
         printf '/>\n\n' >> $labeltable
      end
      printf '</atlas_point_list>\n' >> $labeltable

PUT_ATLAS_TABLE:
   if ($target_dset != '') then
      3drefit -atrstring ATLAS_LABEL_TABLE file:$labeltable $target_dset   \
                                             >& /dev/null
      3drefit -cmap INT_CMAP $target_dset  >& /dev/null
   endif

ADD_ATLAS_ENTRY:   
   if ($target_dset != '') then
      if (${atlas_name} == '') then
         set atlas_name = `3dinfo -prefix_noext $target_dset`
      endif
      if ( -f ${atlas_file} ) then
         echo ""
      echo "Notice: $atlas_file already exists, appending to it ${atlas_name}."
         set ll = `niccc -quiet -stdout \
               -find_nel_with_attr atlas_name ${atlas_name} \
               -f ${atlas_file}`
         if ("$ll" != '') then
            if ($replace == 0) then
               echo ""
               echo "Error: Atlas file already contains atlas named: $atlas_name"
               echo "Either change the name or use -replace at the command line"
               goto BEND
            else
               echo "        New entry will replace that of atlas with same name"
            endif
         endif
         cp -p ${atlas_file} ${atlas_file}.delete
         if ($status) then
            echo "Failed to create temp file"
            goto BEND
         endif
         niccc -quiet -stdout \
               -skip_nel_with_attr atlas_name ${atlas_name} \
               -f ${atlas_file}.delete > ${atlas_file}
         if ($status) then
            echo "niccc failed, aborting"
            mv  ${atlas_file}.delete ${atlas_file}
            goto BEND
         else
            \rm -f ${atlas_file}.delete
         endif
      endif
      printf '<ATLAS\n' >> ${atlas_file}
      printf ' atlas_name="%s"\n' ${atlas_name} >> ${atlas_file}
      printf ' dset_name="%s"\n' $target_dset >> ${atlas_file}
      printf ' template_space="%s"\n' `3dinfo -space $target_dset` \
                                             >> ${atlas_file}
      printf ' description="%s"\n' "$atlas_desc" >> ${atlas_file}
      printf ' comment="Created from %s with:\n    %s %s"\n' \
                  $PWD `basename $0` "$argv[*]" \
                  >> ${atlas_file}
      printf '></ATLAS>\n' >> ${atlas_file}
      
      if ($atlas_file != 'SessionAtlases.niml' &&  \
          $atlas_file:t != 'CustomAtlases.niml') then
         printf 'To make AFNI see atlas %s, you will need to run:\n' $target_dset
         printf ' setenv  AFNI_SUPP_ATLAS %s\n' $atlas_file
         printf ' setenv AFNI_ATLAS_LIST %s\n' $atlas_name
      endif
   endif
   
   MAKE_ATLAS_TABLE_END:

goto END

PARSE:
   set labeltable = 'LABEL_TABLE_NOT_SET'
   set llistmin = ''
   set llistmax = ''
	set Narg = $#
   set target_dset = ''
   set KeysLabel = ''
   set LabelKey = ''
   set verb = 0
   set range = 0
   set showlabels = 0
   set showkeys = 0
   set ltdset = ''
   set quiet_death = 0
   set maxkey = 0
   set word_match = 0
   set gopt = ()
   set ltype = 'roi'
   set atlas_file = 'SessionAtlases.niml'
   set atlas_name = ''
   set atlas_desc = "My Atlas"
   set replace = 0
   set delim = ' '
   set flab = ''
   set mode = 0
   set autolab = 0
   if ( -f TMPLIST_${RNS}_) \rm -f TMPLIST_${RNS}_
	set cnt = 1
   while ($cnt <= $Narg)
      if ("$argv[$cnt]" == "-d" || "$argv[$cnt]" == "-echo") then
         set verb = 1
         set echo
         goto CONTINUE
      endif
     
      if ("$argv[$cnt]" == '-h' || "$argv[$cnt]" == '-help') then
         goto HELP
      endif
      
      if ("$argv[$cnt]" == "-verb") then
         set verb = 1
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-max_key") then
         set maxkey = 1
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-quiet_death") then
         set quiet_death = 1
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-labeltable_of_dset") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need dset after -labeltable_of_dset"
            goto BEND
			else
				@ cnt ++
				set ltdset = "$argv[$cnt]"
            if (`@CheckForAfniDset $ltdset ` < 1) then
               if (! $quiet_death) echo "Failed to find $ltdset"
               goto BEND
            endif 
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-all_labels") then
         set showlabels = 1
         set KeysLabel = ""
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-all_keys") then
         set showkeys = 1
         set KeysLabel = ""
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-match_label") then
         set showlabels = 1
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need label after -match_label"
            goto BEND
			else
				@ cnt ++
				set KeysLabel = "$argv[$cnt]"
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-word_label_match") then
         set word_match = 1
         set SubLoc = $cnt		
         goto CONTINUE
      endif

      if ("$argv[$cnt]" == "-labeltable") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need file after -labeltable"
            goto BEND
			else
				@ cnt ++
				set labeltable = `@NoExt "$argv[$cnt]" .niml .niml.lt`
            set labeltable = $labeltable.niml.lt
            set ltype = 'roi'
			endif
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-atlas_labeltable" || \
          "$argv[$cnt]" == "-atlas_pointlist" ) then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need file after -atlas_pointlist"
            goto BEND
			else
				@ cnt ++
				set labeltable = `@NoExt "$argv[$cnt]" .niml .niml.alt`
            set labeltable = $labeltable.niml.alt
            set ltype = 'atlas'
			endif
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-atlas_file") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need name after -atlas_file"
            goto BEND
			else
				@ cnt ++
				set atlas_file = `@NoExt "$argv[$cnt]" .niml`
            set atlas_file = $atlas_file.niml
			endif
         goto CONTINUE
      endif

      if ("$argv[$cnt]" == "-replace") then
         set replace = 1
         set SubLoc = $cnt		
         goto CONTINUE
      endif

      if ("$argv[$cnt]" == "-atlas_name") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need name after -atlas_name"
            goto BEND
			else
				@ cnt ++
				set atlas_name = "$argv[$cnt]"
			endif
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-atlas_description") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need  string after -atlas_description"
            goto BEND
			else
				@ cnt ++
				set atlas_desc = "$argv[$cnt]"
			endif
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-LT_to_atlas_PL") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need labeltable after -LT_to_atlas_PL"
            goto BEND
			else
				@ cnt ++
				if ( ! -f $argv[$cnt] ) then
               echo "Label table $argv[$cnt] not found"
               goto BEND
            endif
            set labeltable = `@NoExt "$argv[$cnt]" .niml .niml.lt .niml.alt`
            set labeltable = $labeltable.niml.alt
            if ( -f $labeltable ) then
               echo "Output atlas point list $labeltable already exists"
               echo "Delete it if you want to recreate it"
               goto BEND
            endif
            set ttdset = dset_${RNS}
            3dUndump -dimen 3 3 3 -prefix $ttdset >& /dev/null
            3drefit -labeltable $argv[$cnt] $ttdset*HEAD >& /dev/null
            3dinfo -labeltable_as_atlas_points $ttdset*HEAD > $labeltable
            \rm -f dset_*
            echo "Atlas point list now in file $labeltable"
            goto END
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-dset_LT_to_atlas_PL") then
         set SubLoc = $cnt	
         @ 	SubLoc++
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) \
               echo "Need dset and labeltable after -dset_LT_to_atlas_PL"
            goto BEND
			else
				@ cnt ++
				set dset = $argv[$cnt]
            if ( ! -f `@CheckForAfniDset $argv[$cnt] ` < 1 ) then
               echo "Dset $argv[$cnt] not found"
               goto BEND
            endif
            @ cnt ++
            set labeltable = `@NoExt "$argv[$cnt]" .niml .niml.lt .niml.alt`
            set labeltable = $labeltable.niml.alt
            if ( -f $labeltable ) then
               echo "Output atlas point list $labeltable already exists"
               echo "Delete it if you want to recreate it"
               goto BEND
            endif
            3dinfo -labeltable_as_atlas_points $dset > $labeltable
            goto END
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-atlasize_labeled_dset") then
         set SubLoc = $cnt	
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) \
               echo "Need dset after -atlasize_labeled_dset"
            goto BEND
			else
				@ cnt ++
				set dset = $argv[$cnt]
            if ( ! -f `@CheckForAfniDset $argv[$cnt] ` < 1 ) then
               echo "Dset $argv[$cnt] not found"
               goto BEND
            endif
            
            set labeltable = lt_${RNS}.niml.alt
            3dinfo -labeltable_as_atlas_points $dset > $labeltable
            set target_dset = $dset
            set ltype = atlas
            set mode = 1
         endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-add_atlas_dset") then
         set SubLoc = $cnt	
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) \
               echo "Need dset after -add_atlas_dset"
            goto BEND
			else
				@ cnt ++
				set dset = $argv[$cnt]
            set isgood = `3dinfo -is_atlas $dset`
            if ( $isgood != 1 ) then
               echo "Dset $argv[$cnt] not found or not an atlas"
               goto BEND
            endif
            
            set target_dset = $dset
            set ltype = atlas
            set mode = 2
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-klabel") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need LABEL after -klabel"
            goto BEND
			else
				@ cnt ++
				set LabelKey = `printf %d "$argv[$cnt]"`
            if ($LabelKey != $argv[$cnt]) then
               echo "$argv[$cnt] is not interpreted as an integer key"
               goto BEND
            endif
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-lkeys") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need LABEL after -lkeys"
            goto BEND
			else
				@ cnt ++
				set KeysLabel = "$argv[$cnt]"
			endif
         goto CONTINUE
      endif
      if ("$argv[$cnt]" == "-rkeys") then
         set SubLoc = $cnt		
		   if ($SubLoc == $Narg) then
				if (! $quiet_death) echo "Need LABEL after -rkeys"
            goto BEND
			else
				@ cnt ++
				set KeysLabel = "$argv[$cnt]"
            set range = 1
			endif
         goto CONTINUE
      endif
      
		if ("$argv[$cnt]" == "-lab_r" || "$argv[$cnt]" == "-label_range") then
         set nneed = `ccalc -i $cnt + 3`
         if ($nneed > $Narg) then
				if (! $quiet_death) echo "Need 2 values after -label_range"
            goto BEND
			else
				@ cnt ++
            if ($argv[$cnt] =~ -*) then
               if (! $quiet_death) \
                  echo "Label name $argv[$cnt] cannot start with '-'"
               goto BEND
            endif 
            echo $argv[$cnt] >> TMPLIST_${RNS}_
            set N_llist = `\wc -l TMPLIST_${RNS}_` ; set N_llist = $N_llist[1]
            
            @ cnt ++
            if ($argv[$cnt] =~ -*) then
               if (! $quiet_death) \
                  echo "Label min range $argv[$cnt] cannot be '-'"
               goto BEND
            endif 
            set llistmin = ($llistmin `ccalc -i $argv[$cnt]`)
            @ cnt ++
            if ($argv[$cnt] =~ -*) then
               if (! $quiet_death) \
                  echo "Label min range $argv[$cnt] cannot be '-'"
               goto BEND
            endif 
            set llistmax = ($llistmax `ccalc -i $argv[$cnt]`)
            if ($llistmax[$#llistmax] == 0 ||   \
                $llistmin[$#llistmin] == 0 ||   \
                $llistmin[$#llistmin] > $llistmax[$#llistmax]) then
               if (! $quiet_death) \
                  printf "Bad range values of [%d %d] for label '%s'\n" \
                   $llistmin[$#llistmin] $llistmax[$#llistmax] \
                   `sed -n ${N_llist}p TMPLIST_${RNS}_` 
               goto BEND
            endif
			endif
         goto CONTINUE
      endif
		if (  "$argv[$cnt]" == "-lab" || \
            "$argv[$cnt]" == "-lab_v" || \
            "$argv[$cnt]" == "-label_value") then
         set nneed = `ccalc -i $cnt + 2`
         if ($nneed > $Narg) then
				if (! $quiet_death) \
               echo "Need 1 value after -label_value"
            goto BEND
			else
				@ cnt ++
            if ($argv[$cnt] =~ -*) then
               if (! $quiet_death) \
                  echo "Label name $argv[$cnt] cannot start with '-'"
               goto BEND
            endif 
            echo $argv[$cnt] >> TMPLIST_${RNS}_
            set N_llist = `\wc -l TMPLIST_${RNS}_` ; set N_llist = $N_llist[1]
            @ cnt ++
            if ($argv[$cnt] =~ -*) then
               if (! $quiet_death) \
                  echo "Label min range $argv[$cnt] cannot be '-'"
               goto BEND
            endif 
            set llistmin = ($llistmin `ccalc -i $argv[$cnt]`)
            set llistmax = ($llistmax `ccalc -i $argv[$cnt]`)
			endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-lab_file_delim") then
         if ($cnt > $Narg) then
            if (! $quiet_death) \
               echo "Need a delimiter after -lab_file_delim"
            goto BEND
         endif
         if ("$flab" != '') then
            echo "You must specify -lab_file_delim BEFORE -lab_file"
            goto BEND
         endif
         @ cnt ++
         set delim = "$argv[$cnt]"
         goto CONTINUE
      endif 
      
      if (  "$argv[$cnt]" == "-lab_file") then
         set nneed = `ccalc -i $cnt + 3`
         if ($nneed > $Narg) then
				if (! $quiet_death) echo "Need 2 values after -lab_file"
            goto BEND
			else
            @ cnt ++
            set flab = $argv[$cnt]
            if (! -f $flab) then
               echo "File $flab not found"
               goto BEND
            endif
            @ cnt ++
            set iL = `ccalc -i $argv[$cnt]+1`
            @ cnt ++
            set iV = `ccalc -i $argv[$cnt]+1`
            set llistmin = (`awk -F "$delim" '{print $'$iV'}' $flab`)
            awk -F "$delim" '{print $'$iL'}' $flab | \
                     sed 's/^ *//g' | sed 's/ *$//g' | \
                     sed '/^ *$/d' > TMPLIST_${RNS}_
            set N_llist = `\wc -l TMPLIST_${RNS}_` ; set N_llist = $N_llist[1]
            set llistmax = ($llistmin)
            if ($N_llist < 1 || $#llistmin < 1) then
               set jj = '$'
               echo "Error:"
               echo "Failed to parse label or key columns in $flab"
               echo "Make sure column index and delimiters are correct"
               echo ""
               echo "When -lab_file, and -lab_file_delim are properly set,"
               echo "this command should give you all the keys:"
               echo "   awk -F '$delim' '{print $jj$iL}' $flab"
               echo "and this command should give you all the labels:"
               echo "   awk -F '$delim' '{print $jj$iV}' $flab"
               echo ""
               goto BEND
            endif
            if ($#llistmin != $N_llist) then
               echo "Error:"
               echo "Have $N_llist labels, but $#llistmin keys"
               echo ""
               goto BEND
            endif
            #More test for goodness
            1dcat "1D:$llistmax" >& /dev/null
            if ( $status ) then
               echo "Failed to parse $flab columns make sure column"
               echo "selectors and delimiters are OK."
   echo "Got '`sed -n $1p TMPLIST_${RNS}_`' for 1st label and '$llistmax[1]' for 1st key"
               echo ""
               goto BEND
            endif
         endif
         goto CONTINUE
      endif
      
      if ("$argv[$cnt]" == "-dset") then
         if ($cnt > $Narg) then
            if (! $quiet_death) \
               echo "Need a dset after -dset"
            goto BEND
         endif
         @ cnt ++
         set target_dset = $argv[$cnt]
         if (`@CheckForAfniDset $target_dset` < 2) then
            if (! $quiet_death) \
               echo "-dset $target_dset not found"
            goto BEND
         endif 
         goto CONTINUE
      endif
       
      if ("$argv[$cnt]" == "-dset_autolab") then
         if ($cnt > $Narg) then
            if (! $quiet_death) \
               echo "Need a dset and suffix after -dset_autolab"
            goto BEND
         endif         
         set target_dset = $argv[$cnt]
         if (`@CheckForAfniDset $target_dset` < 2) then
            if (! $quiet_death) \
               echo "-dset $target_dset not found"
            goto BEND
         endif
         if ($cnt > $Narg) then
            if (! $quiet_death) \
               echo "Need a dset and suffix after -dset_autolab"
            goto BEND
         endif         
         set suff = $argv[$cnt]
         set autolab = 1
         goto CONTINUE
      endif
       
      if ("$argv[$cnt]" == "-centers") then
         set COG = 1
         goto CONTINUE
      endif      
      
      echo "Error: Option or parameter '$argv[$cnt]' not understood"
      apsearch -popt `basename $0` -word $argv[$cnt]
      goto BEND
      
      CONTINUE:		
		@ cnt ++
	end

 
   
   if (0) then
      echo "Have:"
      cat TMPLIST_${RNS}_
      echo $llistmin
      echo $llistmax
   endif
   
   goto RETURN_PARSE

HELP:
   echo ""
   echo "Script used to create a label table "
   echo ""
   echo "Usage: `basename $0` <-labeltable LABELTABLE> "
   echo "                     [-atlas_pointlist ATLAS_POINTLIST>"
   echo "                     [<-lab_r LAB MIN MAX> <-lab_r LAB MIN MAX> <...>]"
   echo "                     [<-lab_v LAB KEY> <-lab_v LAB VAL> <...>]"
   echo "                     [<-lab_file FILE cLAB cVAL>]"
   echo "                     [<-dset DSET>]"
   echo "   -labeltable LABELTABLE: Name of output label table"
   echo "   -atlas_pointlist ATLAS_POINTLIST: Instead of a label table"
   echo "                                     produce an atlas point list"
   echo "   -lab_r LAB MIN MAX: Define a label LAB its minimum key MIN"
   echo "                       and its maximum value MAX. "
   echo "              For example: -lab_r GM 5 7 generates in the labeltable:"
   echo '                           "5" "GM01"'
   echo '                           "6" "GM02"'
   echo '                           "7" "GM03"'
   echo "   -lab_v LAB KEY: Define a label LAB and its value KEY"
   echo "              For example: -lab_v  WM 8 generates in the labeltable:"
   echo '                           "8" "WM"'
   echo "   -lab_file FILE cLAB cVAL: Labels and keys are in text file FILE."
   echo "                          cLAB is the index of column containing labels"
   echo "                          vVAL is the index of column containing keys"
   echo "                          (1st column is indexed at 0)"
   echo "   -lab_file_delim COL_DELIM: Set column delimiter for -lab_file option"
   echo "                              Default is ' ' (space), but you can set"
   echo "                              your own. ';' for example. Note that the "
   echo "                              delimiter is passed directly to awk's -F" 
   echo "                 Note: This option must be set BEFORE -lab_file option"
   echo "                       on the command line."
   echo "   -dset DSET: Attach the label table (or atlas point list) to "
   echo "               dataset DSET"
#   echo "   -dset_autolab DSET SUFFIX: Create a labeltable from the unique"
#   echo "                              set of integral values in DSET using"
#   echo "                              the suffix SUFFIX and put the labeltable"
#   echo "                              in DSET" 
   echo "   -centers : Compute center of mass location for each ROI"
   echo "              requires simple blobbish ROIs to work"
   echo ""
   echo "   Note that you cannot use the same key for multiple labels."
   echo "   When redundancies occur, the script preserves just one entry."
   echo ""
   echo "   Example:"
   echo "      @MakeLabelTable   -lab_r CSF 1 3 -lab_r GM 5 7 -lab_v WM 8  \"
   echo "                        -labeltable example1"
   echo ""
   echo "Usage mode 2: Get information about an existing labeltable"
   echo "    `basename $0` <-labeltable LABELTABLE> "
   echo "        <[-lkeys LABEL] | [-rkeys LABEL] | [-all_labels] | [-all_keys]>"
   echo ""
   echo "    -all_labels: Return a listing of the labels"
   echo "    -all_keys:  Return a listing of all keys"
   echo "    -lkeys LABEL: Return the keys whose labels match LABEL"
   echo "    -rkeys LABEL: Return the range (min max) of keys whose "
   echo "                  labels match LABEL"
   echo "    -klabel KEY: Return the label associated with KEY"
   echo "    -match_label LABEL: Return labels matching LABEL"
   echo "    -labeltable_of_dset DSET: Dump the labeltable from DSET"
   echo "    -word_label_match: Use word matching (grep's -w )"
   echo "                       With this option, 'Out' matches 'Out.l1'"
   echo "                       but no longer matches 'OutSk'"
   echo "    -quiet_death: Do not give error messages when failing"
   echo "   Options in usage 2 are mutually exclusive"
   echo ""
   echo "Usage mode 3: Transform Label Tables to Atlas Point Lists and exit"
   echo "    `basename $0` [<-LT_to_atlas_PL LABELTABLE>] "
   echo "                  [<-dset_LT_to_atlas_PL DSET POINTLIST]"
   echo "    -LT_to_atlas_PL LABELTABLE: Transform Label Table LABELTABLE to "
   echo "                                Atlas Point List"
   echo "    -dset_LT_to_atlas_PL DSET POINTLIST: Get Label Table in"
   echo "                                DSET and write it out as an"
   echo "                                Atlas Point List to POINTLIST" 
   echo ""
   echo "   Example:"
   echo "      @MakeLabelTable -LT_to_atlas_PL aparc.a2009s+aseg_rank.niml.lt"
   echo ""
   echo "Usage mode 4: Turn a labeled dataset or an integral valued dset "
   echo "              into an ATLAS"
   echo "    `basename $0` [<-atlasize_labeled_dset SOME_LABELED_ROI_DSET>] "
   echo "                  [<-atlas_file ATLAS_NIML_FILE] "
   echo "                  [<-atlas_name ATLAS_NAME>] [-replace]"
   echo ""
   echo "     -atlasize_labeled_dset SOME_LABELED_ROI_DSET: Change a labeled"
   echo "                            ROI dataset into an atlas"
   echo "     -atlas_file ATLAS_NIML_FILE: Specify the name of the NIML file"
   echo "                            where atlas attributes are stored."
   echo "                            Default is ./SessionAtlases.niml which"
   echo "                            is a good choice for single subject atlases"
   echo "     -atlas_name ATLAS_NAME: Atlas is named based on the prefix, by "
   echo "                             default. You can override that with this"
   echo "                             option." 
   echo "     -atlas_description ATLAS_DESC: Atlas description, which appears"
   echo "                             in afni's whereami window. Default is"
   echo "                             'My Atlas'"  
   echo "     -replace: If ATLAS_NAME is already in ATLAS_NIML_FILE, the script"
   echo "               will fail to proceed unless you instruct it to do so "
   echo "               this option"
   echo "     -add_atlas_dset ATLAS_DSET: Use if you have an atlas that you want"
   echo "                                 added to an atlas_file." 
   echo ""      
   echo "   Example:"
   echo "      @MakeLabelTable -atlasize_labeled_dset SOME_LABELED_ROI_DSET"
   echo " or you can specify the keys in a file:"
   echo "      @MakeLabelTable -lab_file FILE cLAB cVAL \"
   echo "                      -atlas_pointlist apl \"
   echo "                      -dset target_dset \"
   echo "                      -atlas_file SessionAtlases.niml"
   echo ""
   echo "            -------------------------"
   echo "            See also @Atlasize script"
   echo "            -------------------------"
   echo ""
   @global_parse -gopts_help
   echo ""
   goto END

BEND:
   set stat = 1
   goto END
      
END:
\rm -f TMPLIST_${RNS}_ >& /dev/null
if ($stat == 0 && -f $log) then
   \rm /tmp/${RNS}.$log:t
endif
exit $stat